System information

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide 84
4
Block ANC Act Code Blocks all anonymous calls. Default setting: *77.
Block ANC Deact
Code
Removes blocking of all anonymous calls. Default
setting: *87.
DND Act Code Enables the do not disturb feature. Default setting: *78.
DND Deact Code Disables the do not disturb feature. Default setting: *79.
CID Act Code Enables caller ID generation. Default setting: *65.
CID Deact Code Disables caller ID generation. Default setting: *85.
CWCID Act Code Enables call waiting, caller ID generation. Default setting:
*25.
CWCID Deact Code Disables call waiting, caller ID generation. Default
setting: *45.
Dist Ring Act Code Enables the distinctive ringing feature. Default setting:
*26.
Dist Ring Deact
Code
Disables the distinctive ringing feature. Default setting:
*46.
Speed Dial Act Code Assigns a speed dial number. Default setting: *74.
Paging Code Used for paging other clients in the group. Default
setting: *96.
Secure All Call Act
Code
Makes all outbound calls secure. Default setting: *16.
Secure No Call Act
Code
Makes all outbound calls not secure. Default setting: *17.
Secure One Call Act
Code
Makes the next outbound call secure. (It is redundant if
all outbound calls are secure by default.) Default setting:
*18.
Secure One Call
Deact Code
Makes the next outbound call not secure. (It is redundant
if all outbound calls are not secure by default.) Default
setting: *19.
Conference Act
Code
If this code is specified, the user must enter it before
dialing the third party for a conference call. Enter the
code for a conference call.
Field Description