System information
Table Of Contents
- Getting Started with the Cisco SPA100 Series Phone Adapters
- Quick Setup for Voice over IP Service
- Configuring the Network
- Configuring Voice
- Administration Settings
- Viewing the Status and Statistics
- Frequently Asked Questions
- Using the IVR for Administration
- Installation Options
- Where to Go From Here
Getting Started with the Cisco SPA100 Series Phone Adapters
Product Features
Cisco SPA100 Series Phone Adapters Administration Guide 9
1
Back Panel
The following features are found on the back panel of the ATA.
SPA112
SPA122
Feature Description
RESET Using a paperclip or similar object, press this button briefly to
restart the unit. Press and hold for 20 seconds to restore the
factory default settings. All user-changeable non-default
settings will be lost. This may include network and service
provider data.
PHONE 1,
PHONE 2
(gray)
Connect to an analog phone, using an RJ-11 phone cable.
ETHERNET
(yellow)
SPA122 Only
Can be used to connect to a device on your network, such as
a computer or an Ethernet switch, using an Ethernet cable.
INTERNET
(blue)
Connect to a broadband network device (DSL or cable
modem) or a network router, using an Ethernet cable.