System information

Configuring Voice
Configuring Voice Settings
Cisco SPA100 Series Phone Adapters Administration Guide 95
4
Subscriber Information
Dial Plan
The default dial plan script for each line is as follows: (*xx|[3469]11|0|00|[2-
9]xxxxxx|1xxx[2-9]xxxxxx|xxxxxxxxxxxx.)
Each parameter is separated by a semi-colon (;)
Example 1:
*1xxxxxxxxxx<:@fwdnat.pulver.com:5082;uid=jsmith;pwd=xy z
Example 2:
Reply 182 On Call Waiting When enabled, the ATA replies with a SIP182
response to the caller if it is already in a call and
the line is off-hook. To use this feature select yes.
Default setting: no.
Use Anonymous With
RPID
When set to yes, use "anonymous" in the SIP
message. Default setting: Yes
Use Local Addr In From Use the local ATA IP address in the SIP FROM
message. Default setting: no.
Field Description
Display Name Display name for caller ID.
User ID User ID for this line.
Password Password for this line.
Use Auth ID To use the authentication ID and password for
SIP authentication, select yes. Otherwise, select
no to use the user ID and password. Default
setting: no.
Auth ID Authentication ID for SIP authentication.
Resident Online Number This setting allows you to associate a "local"
telephone number with this line using a valid
Skype Online Number from Skype. Calls made to
that number will ring your phone. Enter the
number without spaces or special characters.
Field Description