Datasheet

ManualsBrandsCisco ManualsNetworkingC6800-48P-SFP-XL=

Data Sheet

Gigabit Ethernet Modules for Cisco Catalyst

6807-XL and 6500-E Switches

Gigabit Ethernet line cards serve both campus and data center networking

requirements in a variety of enterprise, commercial, and service provider

environments.

Product Overview

The Cisco

Catalyst

6807-XL switch offers two new Gigabit Ethernet modules that work with the Catalyst

Supervisor Engine 2T/2TXL. The modules also work in Catalyst 6500 Series Switches.

The Gigabit Ethernet modules serve campus and data center networking requirements in enterprise, commercial,

and service provider environments. They include a 48-port Gigabit Ethernet Copper Module and 48-port Gigabit

Ethernet Fiber Module.

The Gigabit Ethernet Copper Module supports RJ-45 connectors. It supports operational distances of up to

100 meters over Category 5, 5E, and 6 Unshielded Twisted Pair (UTP) copper cabling. The Gigabit Fiber

Module supports pluggable optics and supports operational distances of up to 80 km over single-mode and

multimode fiber.

There are four different 1-Gbps modules supported by Supervisor 2T and 2TXL:

●

C6800-48P-SFP and C6800-48P-SFP-XL: 48-port SFP fiber Gigabit Ethernet Module with DFC4 and

DFC4XL (Figure 1)

●

C6800-48P-TX and C6800-48P-TX-XL: 48-port Copper Gigabit Ethernet Module with DFC4 and

DFC4XL (Figure 2)

Figure 1. 48-Port Fiber Gigabit Ethernet Module

Figure 2. 48-Port 10/100/1000 Copper Module

Summary of content (6 pages)

PAGE 1
Data Sheet Gigabit Ethernet Modules for Cisco Catalyst 6807-XL and 6500-E Switches Gigabit Ethernet line cards serve both campus and data center networking requirements in a variety of enterprise, commercial, and service provider environments. Product Overview The Cisco® Catalyst® 6807-XL switch offers two new Gigabit Ethernet modules that work with the Catalyst Supervisor Engine 2T/2TXL. The modules also work in Catalyst 6500 Series Switches.
PAGE 2
Below are a few key details about the fiber and copper line cards: ● Backplane connection: Connects to the switch fabric using dual full-duplex 20-Gbps switch fabric channels (40 Gbps total). ● Chassis/slot support: Can occupy slots 1-2 and 5-7 in C6807-XL chassis. Can occupy any slots in Cisco Catalyst 6503E, 6504E, 6506E, 6509E, and 6509-V-E. Can occupy slots 1-6 and 9-13 in a Cisco Catalyst 6513-E. ● Supervisor engine: Compatible with Supervisor Engine 2T and Supervisor Engine 2TXL.
PAGE 3
Module SFP Wavelength (nm) Fiber/Cable Type Core Size (micron) Model Bandwidth (MHz/km) Cable Distance C6800-48P-SFP and C6800-48P-SFP-XL 1000BASE-T - Category 5 - - 100 m (328 ft) * Mode-conditioning patch is required. Using an ordinary patch cord with MMF, 1000BASE-LX/LH SFP/GBICs, and a short link distance (10s of meters) can cause transceiver saturation resulting in an elevated bit error rate (BER). In addition, when using the LX/LH SFP/GBIC with 62.
PAGE 4
Item Specification(s) Regulatory Compliance EMC Compliance: ● FCC Part 15 (CFR 47) Class A ● VCCI Class A with UTP, Class B with STP ● EN55022 Class A with UTP, Class B with STP ● CISPR 22 Class A with UTP, Class B with STP ● CE marking ● AS/NZS 3548 Class A with UTP, Class B with STP Safety Compliance: ● UL 1950 ● CSA C22.2 No.
PAGE 5
Cisco and Partner Services Enable the innovative, secure, intelligent edge using personalized services from Cisco and our partners. Through a discovery process that begins with understanding your business objectives, we help you integrate the new Cisco Catalyst 6807-XL and the 6500 E-Series into your architecture and incorporate network services onto that platform. Sharing knowledge and leading practices, we support your success every step of the way as you deploy, absorb, manage, and scale new technology.