Specifications

show
1. Both optical and copper ports report the same syntax. For example, Gigabit Ethernet RJ-45 port 0/2 reports GigabitEthernet 0/2, as does Gigabit Ethernet
GBIC port 0/2.
Chassis slot—always 0
Interface port—1, 2, or 3
Gigabit Ethernet 0/1
Gigabit Ethernet 0/2
Gigabit Ethernet 0/3
C7200-I/0-GE+E Gigabit Ethernet (port GE0) Chassis slot—always 0
Interface port—0
gigabitethernet 0/0
Ethernet (port E0) Chassis slot—always 0
Interface port—0
fastethernet 0/0
C7200-I/0-2FE/E Fast Ethernet/Ethernet (port0) Chassis slot—always 0
Interface port—0
fastethernet 0/0
Fast Ethernet/Ethernet (port1) Chassis slot—always 0
Interface port—1
fastethernet 0/1
C7200-I/0-FE
2
2. The Product Number C7200-I/O-FE does not specify MII because both an MII and an RJ-45 receptacle are included.
Fast Ethernet (MII or RJ-45) Chassis slot—always 0
Interface port—0
fastethernet 0/0
C7200-I/0 No interface ports — —
C7200-I/0-FE-MII
3
3. The I/O controller with the Product Number C7200-I/O-FE-MII has a single MII FastEthernet receptacle only. Although still supported by Cisco Systems,
this I/O controller with a single MII receptacle is no longer an orderable product as of May 1998.
Fast Ethernet (MII) Chassis slot—always 0
Interface port—0
fastethernet 0/0