Datasheet

Cisco 7200-I/O-GE+E and Cisco 7200-I/O-2FE/E Input/Output Controllers
show controllers gigabitethernet
10
Cisco IOS Release 12.1(3a)E
show controllers gigabitethernet
To display initialization block information, transmit ring, receive ring, and errors for the interface
controllers about the Gigabit Ethernet interface of the Cisco 7200-I/O-GE+E, use the
show controllers gigabitethernet privileged EXEC command.
show controllers gigabitethernet slot/port
Syntax Description
Defaults No default behavior or values.
Command Modes Privileged EXEC
Command History
Usage Guidelines This command is used on the Cisco 7200-I/O-GE+E to display hardware and software information
about the Gigabit Ethernet interface.The I/O controller is always found in slot 0.
slot Slot number on the interface.
port Port number on the interface.
Release Modification
11.1 CC This command was introduced.
12.1(3a)E Support for the Cisco 7200-I/O-GE+E controller was introduced.