Installation guide

Antenna Guide for ISR and CGR with Verizon Wireless 4G LTE

ANT-4G-PNL-

OUT-N

Description – Outdoor Use

• Available in Q2 CY2012

• Flat panel antenna

• Outdoor

ANT-4G-SR-OUT-

TNC

Description – Outdoor Use

• Available Q2 CY2012

• Low-profile outdoor saucer antenna

Item Specification

CAB-L400-20-

TNC-N

20 ft, LMR-400 cable with a TNC male and N female

connector

CAB-L400-50-

TNC-N

50 ft, LMR-400 cable with a TNC male and N female

connector

The LTE eHWIC and GRWIC both have female TNC connectors for antennas.

www.cisco.com/en/US/prod/collateral/modules/ps5949/ps11540/ehwic_4g_ltehw.pdf

www.cisco.com/en/US/prod/collateral/routers/ps10967/ps10977/datasheet_c78-696807_ps10984_Products_Data_Sheet.html

The supplied Cisco eHWIC antennas have male TNC connections, and extension cables have

female TNC on one end, male TNC on the other end.

www.cisco.com/en/US/prod/collateral/routers/ps10967/ps10977/datasheet_c78-696807_ps10984_Products_Data_Sheet.html

The Outdoor GRWIC omni-directional stick antenna ANT-4G-OMNI-OUT-N has a female N

connector and must be used with a supported cable with male N and male TNC CAB-L400-20-

TNC-N or CAB-L400-50-TNC-N

www.cisco.com/en/US/docs/routers/connectedgrid/antennas/installing/Outdoor_Omni_for_2G_3G_Cellular.html

The Outdoor GRWIC flat panel antenna ANT-4G-PNL-OUT-N has a female N connector and

must be used with a supported cable with male N and male TNC CAB-L400-20-TNC-N or CAB-

L400-50-TNC-N

www.cisco.com/en/US/docs/routers/connectedgrid/antennas/installing/Outdoor_Multiband_Panel_4G.html

Although supported on either, it is recommended to use eHWIC antennas with the eHWICs and

GRWIC antennas with GRWICs. There is an outdoor antenna available for the LTE eHWIC,

ANT-4G-SR-OUT-TNC. The outdoor GRWIC antennas and their required associated cables can

be used with an LTE eHWIC (as spares, with “=” added to the sku). Two antennas should always

be used with an LTE GRWIC, LTE eHWIC, or C819G-4G-V.