Datasheet

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 25
WS-X4712-SFP+E:
●
48 gigabits per-slot capacity
●
Bandwidth is allocated across four 3-port groups, providing 12 Gbps per port group (2.5:1)
●
Up to 12 ports 10GE SFP+ (10GBASE-R) or 12 ports GE SFP (1GBASE-X)
●
SFP+ and SFP can be used simultaneously on the same line card without any restrictions
●
Cisco IOS XE Release 3.1.0SG or later
●
IEEE 802.1AE and Cisco TrustSec capability in hardware
●
L2-4 Jumbo Frame support (up to 9216 bytes)
●
Enterprise and commercial: designed for high-speed backbone and switch-to-switch applications
●
Service provider: 10GE/GE mix aggregation for DSLAM/PON/mobile data backhaul
●
WS-X4712-SFP+E is not supported on 4507R-E and 4510R-E chassis
Figure 4 shows the WS-X4606-X2-E.
Figure 4. WS-X4606-X2-E Cisco Catalyst 4500E Series 6-Port 10 Gigabit Ethernet (X2)
WS-X4606-X2-E:
●
24 gigabits per-slot capacity
●
24-gigabit bandwidth is allocated across six 10 Gigabit Ethernet ports (2.5:1)
●
10GBASE-X (X2) and 1GBASE-X (SFP)
●
Up to 6 ports 10GE X2 or 12 ports GE SFP using TwinGig Converter Module
●
TwinGig modules must be used in groups of three: ports 1-3 or ports 4-6
●
Cisco IOS Software Release 12.2(40)SG or later
●
L2-4 Jumbo Frame support (up to 9216 bytes)
●
Enterprise and commercial: designed for high-speed backbone and switch-to-switch applications
●
Service provider: 10GE/GE mix aggregation for DSLAM/PON/mobile data backhaul
Cisco Catalyst 4500E Series Gigabit Ethernet Fiber Line Card
Figure 5 shows the WS-X4748-SFP-E.
Figure 5. WS-X4748-SFP-E