Technical Specs

• show wpan hardware, on page 55
• show wpan packet-count, on page 57
• show wpan link-neighbors, on page 58
• show wpan outage, on page 59
• show wpan restoration-table, on page 59
• show wpan rpl, on page 59
show wpan config
Router# show wpan 4/1 config
module type: RF-WPAN (IEEE 802.15.4e/g RF 900MHz)
ssid: migration_far2 <-- #See Naming the SSID, on page 28.
panid: 7224 <-- #See Naming Your PAN, on page 27.
transmit power: -30 <-- #See Configuring Transmit Power, on page 28.
channel: 254 <-- #Channel hopping setting
dwell: window 20000 max-dwell 400
beacon async: min-interval 120 max-interval 900 suppression-coefficient 1
security mode: 1
test mode: 0 (test firmware only)
admin_status: up
rpl prefix: 2092:1:1:1::/64
rpl route-poisoning: off
rpl dodag-lifetime: 120
rpl dio-dbl: 0
rpl dio-min: 20
rpl version-incr-time: 60
detach bridge: no
bootloader mode: no
mcast-agent: FF38:40:2092:1:1:1:0:1 61624 1153
firmware version: 5.5.48
slave mode: no
show wpan hardware
To view the WPAN configuration that resides on the WPAN hardware, use the show wpan <slot >/1 hardware configuration
command:
Router# show wpan 4/1 hardware hwversion
hardware version: Itron OWCM
Hardware rev : 3.1
Model name : OWCM
Hardware ID : RFLAN/3.60/3.80
Router# show wpan 4/1 hardware version
firmware version: 5.5.48, apps/bridge, master, 4b89e37, Apr 4
Router# show wpan 4/1 hardware config
serial number: FF-FF-FF-FF-FF-FF-FF-FF
eui64: 000781080067B074
ssid: migration_far2
panid: 7224
transmit power: -30 (<-txpower_reg 0x12)
channel: 254
channel notch: none
dwell: window 20000 max-dwell 400
beacon async: min-interval 120 max-interval 900 suppression-coefficient 1
security mode: 1
55
REVIEW DRAFT - CISCO CONFIDENTIAL