Technical Specs
Table Of Contents
- Cisco Connected Grid WPAN Module for CGR 1000 Series Installation and Cisco Resilient Mesh Configuration Guide (Cisco IOS)
- Cisco Connected Grid WPAN Module for CGR 1000 Series Installation and Cisco Resilient Mesh Configuration Guide (Cisco IOS)
- Hardware Overview
- WPAN Antennas, Connectors, and Cables
- Installing and Removing the Module
- Technical Specifications
- Information About Cisco Resilient Mesh and WPAN
- Configuring Cisco Resilient Mesh and the WPAN Module
- Configuring the WPAN Interface
- Configuring the CGM WPAN OFDM Module
- Configuring Adaptive Modulation
- Configuring Group Multicast
- Configuring RPL
- Configuring IPv6
- Configuring PON RPL
- Configuring the Power Outage Server
- Configuring QoS
- Configuring Cisco Resilient Mesh Security
- Configuring IPv6 Multicast Agent
- Configuring Dual-PHY WPAN
- Configuring DTLS Relay for EST
- Configuring Wi-SUN Mode
- Verifying Connectivity to the CGR
- show Command Examples
- Debugging the WPAN Module
- Sample Router Configuration
- Sample CGR and ASR Configuration
- Checking and Upgrading the WPAN Firmware Version
- Related Documentation
- Obtaining Documentation and Submitting a Service Request
The minimum RSSI to join a mesh network is -95 dBm; a lower RSSIF/RRSIR value will not allow the node to establish
connectivity.
Note
show wpan outage
The show wpan <slot>/1 outage table command shows recent power-outage notification (PON) events in the PAN during the past
hour.
Route# show wpan 4/1 outage-table
---------------------- WPAN POWER OUTAGE NOTIFICATION TABLE ----------------------
EUI64 TIMESTAMP CNT_B CNT_R FIRST_HEARD LAST_HEARD SSLOT
00078108003C2200 1399405190 1 0 12:39:51 12:39:51 4
00078108003C2201 1399405193 1 0 12:39:54 12:39:54 4
Number of Entries in WPAN RECENT POWER OUTAGE NOTIFICATION (PON) TABLE: 2
show wpan restoration-table
The show wpan <slot>/1 restoration-table command shows recent power restoration notification (PRN) events in the PAN during
the past hour.
Router# show wpan 4/1 restoration-table
---------------------- WPAN POWER RESTORATION NOTIFICATION TABLE ---------------------
EUI64 TIMESTAMP OUTAGE_TIME CNT_B CNT_R FIRST_HEARD LAST_HEARD SSLOT
00078108003C2200 1399405290 1399405190 3 33 12:53:30 12:54:15 4
00078108003C2201 1399405293 1399405193 2 34 12:52:44 12:53:26 4
Number of Entries in WPAN RECENT PRN TABLE (POWER RESTORATION NOTIFICATION): 2
show wpan rpl
To view the RPL Directed Acyclic Graph (DAG) and its routing table, use the following commands:
Router# show wpan 4/1 rpl ?
atable Show RPL routing table with external modules
atree Show RPL routing tree figure with external modules
brief Show RPL routing table brief information
config Show RPL configuration
dag-lifetime Show DAG lifetime in minutes
dio-dbl Show DIO dbl value
dio-min Show DIO minimum value
etree Show RPL routing tree figure with EUI64
hopinfo Show RPL routing tree hops information
itable Show RPL routing table with IP route information
ptable Show RPL routing table with parent information
route-poisoning Show route poisoning
stable Show RPL routing table with actual slot info
stree Show RPL routing tree figure with actual slot info
table Show RPL routing table
tree Show RPL routing tree figure
version-incr-time Show version increment time in minutes
Router# show wpan 4/1 rpl table
-------------------------------- WPAN RPL ROUTE TABLE [4] --------------------------------
NODE_IPADDR NEXTHOP_IP LAST_HEARD
2092:1:1:1:AAAA:8108:3C:2200 2092:1:1:1:: 16:29:40
2092:1:1:1:AAAA:8108:3C:2203 2092:1:1:1:: 16:43:10
2092:1:1:1:AAAA:8108:3C:2205 2092:1:1:1:AAAA:8108:3C:2206 16:47:38
2092:1:1:1:AAAA:8108:3C:2206 2092:1:1:1:: 16:55:09
2092:1:1:1:AAAA:8108:3C:2207 2092:1:1:1:: 16:53:00
59
REVIEW DRAFT - CISCO CONFIDENTIAL