Technical Specs
Table Of Contents
- Cisco Connected Grid WPAN Module for CGR 1000 Series Installation and Cisco Resilient Mesh Configuration Guide (Cisco IOS)
- Cisco Connected Grid WPAN Module for CGR 1000 Series Installation and Cisco Resilient Mesh Configuration Guide (Cisco IOS)
- Hardware Overview
- WPAN Antennas, Connectors, and Cables
- Installing and Removing the Module
- Technical Specifications
- Information About Cisco Resilient Mesh and WPAN
- Configuring Cisco Resilient Mesh and the WPAN Module
- Configuring the WPAN Interface
- Configuring the CGM WPAN OFDM Module
- Configuring Adaptive Modulation
- Configuring Group Multicast
- Configuring RPL
- Configuring IPv6
- Configuring PON RPL
- Configuring the Power Outage Server
- Configuring QoS
- Configuring Cisco Resilient Mesh Security
- Configuring IPv6 Multicast Agent
- Configuring Dual-PHY WPAN
- Configuring DTLS Relay for EST
- Configuring Wi-SUN Mode
- Verifying Connectivity to the CGR
- show Command Examples
- Debugging the WPAN Module
- Sample Router Configuration
- Sample CGR and ASR Configuration
- Checking and Upgrading the WPAN Firmware Version
- Related Documentation
- Obtaining Documentation and Submitting a Service Request
# debug wpan all
Sample Router Configuration
The dwell attribute indicates the maximum transmission time on a channel to comply with government regulations, most of
which limit transmissions on a channel to X ms within Y ms (minimum and maximum duration). The dwell command allows
you to set both X and Y . In the U.S., they are typically 400 ms to 20000 ms.
Note
The following example is for a CGR with a basic WPAN configuration:
!
! Last configuration change at 22:59:13 PST Tue Apr 22 2014 by cisco
!
version 15.4
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
no service password-encryption
!
hostname Router
!
boot-start-marker
boot system flash:/cgr1000-universalk9-mz.SSA.154-2.07.CG
boot-end-marker
!
!
enable password cisco
!
aaa new-model
!
!
aaa group server radius nps-group
server name nps-radius
!
aaa authentication enable default none
aaa authentication dot1x default group nps-group
aaa authorization network FLEX local
!
!
!
!
!
aaa session-id common
clock timezone PST -8 0
clock summer-time PST recurring
!
dot11 ssid ArifNXTSY
authentication key-management wpa2
!
!
!
!
!
!
!
!
!
!
!
!
62
REVIEW DRAFT - CISCO CONFIDENTIAL