Technical Specs
Table Of Contents
- Cisco Connected Grid WPAN Module for CGR 1000 Series Installation and Cisco Resilient Mesh Configuration Guide (Cisco IOS)
- Cisco Connected Grid WPAN Module for CGR 1000 Series Installation and Cisco Resilient Mesh Configuration Guide (Cisco IOS)
- Hardware Overview
- WPAN Antennas, Connectors, and Cables
- Installing and Removing the Module
- Technical Specifications
- Information About Cisco Resilient Mesh and WPAN
- Configuring Cisco Resilient Mesh and the WPAN Module
- Configuring the WPAN Interface
- Configuring the CGM WPAN OFDM Module
- Configuring Adaptive Modulation
- Configuring Group Multicast
- Configuring RPL
- Configuring IPv6
- Configuring PON RPL
- Configuring the Power Outage Server
- Configuring QoS
- Configuring Cisco Resilient Mesh Security
- Configuring IPv6 Multicast Agent
- Configuring Dual-PHY WPAN
- Configuring DTLS Relay for EST
- Configuring Wi-SUN Mode
- Verifying Connectivity to the CGR
- show Command Examples
- Debugging the WPAN Module
- Sample Router Configuration
- Sample CGR and ASR Configuration
- Checking and Upgrading the WPAN Firmware Version
- Related Documentation
- Obtaining Documentation and Submitting a Service Request
encapsulation scada
!
interface Async1/2
no ip address
encapsulation scada
!
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip route 0.0.0.0 0.0.0.0 172.27.162.1
ip route 0.0.0.0 0.0.0.0 100.0.0.1
ip route 10.0.0.0 255.0.0.0 172.27.162.1
ip route 172.27.0.0 255.255.0.0 172.27.162.1
ip route 192.168.193.0 255.255.255.0 100.0.0.1
!
!
route-map WPAN permit 10
!
!
access-list 90 permit 2.2.2.2
!
radius server nps-radius
address ipv4 192.168.193.21 auth-port 1645 acct-port 1646
key Cisco123
!
!
!
ipv6 access-list IPv6_access_list
permit ipv6 2091:1:1:1::/64 any
sequence 11 permit ipv6 2092:1:1:1::/64 any
sequence 40 permit ipv6 any any
!
control-plane
!
!
!
!
line con 0
exec-timeout 0 0
privilege level 15
line 1/1 1/2
transport preferred none
stopbits 1
line 1/3 1/6
transport preferred none
transport output none
stopbits 1
line vty 0 4
exec-timeout 0 0
password cisco
login authentication cisco
transport input all
line vty 5 10
transport input all
!
!
!
!
end
67
REVIEW DRAFT - CISCO CONFIDENTIAL










