Technical Specs
Table Of Contents
- Cisco Connected Grid WPAN Module for CGR 1000 Series Installation and Cisco Resilient Mesh Configuration Guide (Cisco IOS)
- Cisco Connected Grid WPAN Module for CGR 1000 Series Installation and Cisco Resilient Mesh Configuration Guide (Cisco IOS)
- Hardware Overview
- WPAN Antennas, Connectors, and Cables
- Installing and Removing the Module
- Technical Specifications
- Information About Cisco Resilient Mesh and WPAN
- Configuring Cisco Resilient Mesh and the WPAN Module
- Configuring the WPAN Interface
- Configuring the CGM WPAN OFDM Module
- Configuring Adaptive Modulation
- Configuring Group Multicast
- Configuring RPL
- Configuring IPv6
- Configuring PON RPL
- Configuring the Power Outage Server
- Configuring QoS
- Configuring Cisco Resilient Mesh Security
- Configuring IPv6 Multicast Agent
- Configuring Dual-PHY WPAN
- Configuring DTLS Relay for EST
- Configuring Wi-SUN Mode
- Verifying Connectivity to the CGR
- show Command Examples
- Debugging the WPAN Module
- Sample Router Configuration
- Sample CGR and ASR Configuration
- Checking and Upgrading the WPAN Firmware Version
- Related Documentation
- Obtaining Documentation and Submitting a Service Request
tunnel protection ipsec profile FlexVPN_IPsec_Profile
!
interface Tunnel1
no ip address
!
interface GigabitEthernet0/1
ip address 100.0.0.1 255.255.255.0
duplex auto
speed auto
!
interface Dot11Radio2/1
ssid sol50_wifi
power local 8
ip address 192.168.111.254 255.255.255.0
load-interval 30
ipv6 enable
no mop enabled
no mop sysid
!
interface FastEthernet2/3
no switchport
no ip address
!
interface FastEthernet2/4
no switchport
no ip address
shutdown
ipv6 address 2011:DEAD:BEEF:CAFE::2/64
ipv6 enable
ipv6 mld join-group FF38:40:2006:DEAD:BEEF:CAFE:0:1
ipv6 ospf 1 area 1
!
interface FastEthernet2/5
no switchport
ip address 172.27.126.11 255.255.255.128
!
interface FastEthernet2/6
no switchport
ip address 2.4.53.7 255.255.0.0
!
interface GigabitEthernet2/1
no switchport
ip address 1.0.0.11 255.255.255.0
shutdown
duplex auto
speed auto
!
interface GigabitEthernet2/2
description SPIRENT-ip address 201.0.0.1 255.255.255.0
no switchport
ip address 201.0.0.1 255.255.255.0
load-interval 30
duplex auto
speed auto
!
interface Wpan5/1
no ip address
ip broadcast-address 0.0.0.0
no ip route-cache
ieee154 beacon-async min-interval 120 max-interval 900 suppression-coefficient 0
ieee154 panid 99
ieee154 ssid migration_soltn
ieee154 txpower 2
outage-server cenbu-nms1.ipv6lab.com
71
REVIEW DRAFT - CISCO CONFIDENTIAL