Installation guide

10
Connecting to the In-Home Network
The following diagrams illustrate examples of the connections you can use to connect
your set-top to your in-home network. Contact your service provider for the recommended
connection method for your home.
Note: The illustrations below may vary from the actual product.
FIOS TV In
T14422
Coaxial
In-Home
Coaxial
Network
Wall
OR
Ethernet
In-Home
CAT-5
Network
Wall
This device is intended to be attached
to a receiver that is not used to receive
over-the-air-broadcast signals.
Connections of this device in any other
fashion may cause harmful interference
to radio communications and is in
violation of the FCC rules, part 15.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CUIDADO: RIESGO DE DESCARGA ELÉCTRICA
NO ABRIR
FiOS TV In
R Pr
L
Pb
YVideo
SD
Audio
Ethernet
USB
1394
Firewire
WARNING: The Ethernet port of this equipment is suitable for connection to
intra-building or unexposed wiring or cabling only. The Ethernet port of this
equipment MUST NOT be metallically connected to interfaces that connect to
the OSP (OutSide Plant) or its wiring. The Ethernet port is designed for use as
an intra-building interface only (Type 2 or Type 4 ports as described in GR-1089-
CORE, Issue 4) and requires isolation from the exposed OSP cabling. The addition
of Primary Protectors is not suffi cient protection in order to connect these
interfaces metallically to OSP wiring.