Release Notes

Americas Headquarters:
© 2003–2008 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Release Notes for Cisco 7600 Series Router Route
Switch Processor 720 ROMMON
Current Release: 12.2(33r)SRE2
Past Releases: 12.2(33r)SRD6, 12.2(33r)SRB3, 12.2(33r)SRB4, 12.2(33r)SRC3
This document describes how to determine if you need to upgrade the ROM monitor (ROMMON) on
your Cisco 7600 series router Route Switch Processor 720 (RSP720). It covers the following RSP720
models: RSP720-3C-GE, RSP720-3CXL-GE, RSP720-3C-10GE, and RSP720-3CXL-10GE. This
document also provides the procedure to download the new ROMMON image from Cisco.com and then
upgrade the ROMMON on your RSP720.
With this procedure, you can upgrade the ROMMON image similar to the way that you upgrade the
operating system software (route switching processor software or MSFC Cisco IOS software). Without
this procedure, you have to order the upgrade kit and physically replace the ROMMON (boot ROM).
Note The ROMMON software upgrade procedure in this publication applies only to RSP720-3C-GE and
RSP720-3CXL-GE with ROMMON Software Release 12.2(33r)SRB3 and later releases, or the
RSP720-3C-10GE and RSP720-3CXL-10GE with ROMMON Software Release 12.2(33r)SRC3 and
later releases.
ROMMON Software Release 12.2(33r)SRE2 and later releases are supported in Cisco 7600 series
systems that are running the following:
Cisco IOS software on the RSP720 and on the MSFC4
Contents
This publication consists of these sections:
Software Images, page 2
ROMMON Image Overview, page 3
New and Changed Information, page 3
Caveats, page 6
Upgrading the RSP720 ROMMON Using Cisco IOS Commands, page 7

Summary of content (12 pages)