Release Notes

10
Release Notes for Cisco 7600 Series Router Route Switch Processor 720 ROMMON
OL-17116-01
Related Documentation
You can also disqualify a specific region of ROMMON and use the other region or go back to using the
Gold ROMMON stored in the OTP EPROM section by using the upgrade rom-monitor slot invalidate
command.
To disqualify a specific ROMMON region, perform these steps:
Step 1 Disqualify a specific ROMMON region:
Router# show rom-monitor slot 5 sp
Region F1:FIRST_RUN
Region F2:FIRST_RUN, preferred
Currently running ROMMON from F2 region
Router# upgrade rom-monitor slot 5 sp invalidate region2
You are about to mark F2 region of SP ROMMON in slot 5 as an invalid region,
proceed[n]? y
Router#
Step 2 Reload the route switching processor for the change to take effect:
Router# reload
Proceed with reload? [confirm]
<output truncated>
Step 3 Verify the change:
Router# show rom-monitor slot 5 sp
Region F1:FIRST_RUN
Region F2:INVALID
Currently running ROMMON from S (Gold) region
Related Documentation
This section refers you to other documentation that also might be useful as you configure your
Cisco 7600 series router. The documentation listed below is available online.
Cisco 7600 Series Router Documentation
An overview of the Cisco 7600 series router features, benefits, and applications can be found in the
Cisco 7600 Series Internet Router Essentials document located at the following URL:
http://www.cisco.com/en/US/products/hw/routers/ps368/products_quick_start09186a0080092248.html
Some of the following other Cisco 7600 series router publications might be useful to you as you
configure your Cisco 7600 series router.
• Cisco 7600 Series Cisco IOS Software Configuration Guide
http://www.cisco.com/en/US/products/hw/routers/ps368/products_installation_and_configuration_
guides_list.html
• Cisco 7600 Series Cisco IOS Command Reference
http://www.cisco.com/en/US/products/hw/routers/ps368/prod_command_reference_list.html