Reference Guide

Cisco Prime Network Analysis Module Command Reference Guide Page 102
monitor protocol encapsulation
To set the protocol encapsulation, use the monitor protocol encapsulation command. To disable
the protocol encapsulation, use the no form of this command. This command is removed in NAM
6.0(1).
monitor protocol encapsulation
no monitor protocol encapsulation
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Command mode
Examples
This example shows how to set the monitor protocol encapsulation.
[e-mail]# monitor protocol encapsulation
gre-ip - encapsulation type
gtp - encapsulation type
ip-esp - encapsulation type
ip-ipv4 - encapsulation type
ip-ipv6 - encapsulation type
[e-mail]# monitor protocol encapsulation
Related Commands
show monitor protocol encapsulation