Installation Guide

Installing the DAXI
4035812 Rev B 11
Note: When stacking a pair of DAXI units to provide up to 8 auxiliary program
channels, use the four dimples in the top of the lower unit to cradle the feet of the
upper unit, as shown below.
To Install the DAXI on a Wall
Complete the following steps to install the DAXI and its power supply on a wall.
1 Carefully select and prepare the area to receive the DAXI unit.
 Consider the weight of the DAXI, DC power supply, mounting brackets, and
all attached cabling.
 Consider any possible accidental impact from passing foot traffic or moving
objects. Avoid mounting the unit in high-traffic areas.
 Consider any additional stress that may be placed on the mounting surface
and hardware by accidental snagging of attached cabling.
 When mounting the unit on a wall, choose a location that allows for
mounting into studs, if possible. Use the DAXI and DC power supply
mounting brackets as guides.
Note: You can wall-mount the DAXI in any of four orientations: facing up,
facing down, facing left, or facing right.