Technical References

3-64
CLI Reference Guide for AsyncOS 9.7 for Cisco Email Security Appliances
Chapter 3 The Commands: Reference Examples
General Management/Administration/Troubleshooting
adminaccessconfig
Description
Use the adminaccessconfig command to configure:
• Login message (banner) for the administrator.
• IP-based access for appliance administrative interface.
• Web interface Cross-Site Request Forgeries protection.
• Option to use host header in HTTP requests.
• Web interface and CLI session inactivity timeout.
Usage
Commit: This command requires a ‘commit’.
Cluster Management: This command can be used in all three machine modes (cluster, group, machine).
Batch Command: This command supports a batch format.
Batch Format
The batch format of the adminaccessconfig command can be used to perform all the functions of the
traditional CLI command.
• Select whether to allow access for all IP addresses or limit access to specific IP address/subnet/range
• Adding a new IP address/subnet/range
• Editing an existing IP address/subnet/range
• Deleting an existing IP address/subnet/range
• Printing a list of the IP addresses/subnets/ranges
adminaccessconfig ipaccess <all/restrict/proxyonly/proxy>
adminaccessconfig ipaccess new <address>
adminaccessconfig ipaccess edit <oldaddress> <newaddress>
adminaccessconfig ipaccess delete <address>
adminaccessconfig ipaccess print