Manual
Layer 2 Tunnel Protocol Version 3
Configuration Examples for Layer 2 Tunnel Protocol Version 3
57
Cisco IOS Releases 12.0(29)S and 12.2(25)S
Configuration Examples for Layer 2 Tunnel Protocol Version 3
This section provides the following configuration examples:
• Configuring Frame Relay DLCI-to-DLCI Switching Example, page 57
• Configuring Frame Relay Trunking Example, page 58
• Configuring QoS for L2TPv3 on the Cisco 7500 Series Example, page 58
• Configuring QoS for L2TPv3 on the Cisco 12000 Series Example, page 59
• Configuring MLFR for L2TPv3 on the Cisco 12000 Series Example, page 60
• Configuring an MQC for Committed Information Rate Guarantees Example, page 60
• Configuring a Static L2TPv3 Session for an Xconnect Ethernet Interface Example, page 61
• Configuring a Negotiated L2TPv3 Session for an Xconnect VLAN Subinterface Example, page 61
• Configuring a Negotiated L2TPv3 Session for Local HDLC Switching Example, page 62
• Configuring a Pseudowire Class for Fragmentation of IP Packets Example, page 62
• Setting the Frame Relay DE Bit Configuration Example, page 62
• Matching the Frame Relay DE Bit Configuration Example, page 63
• Configuring the Xconnect Attachment Circuit for ATM VP Mode Single Cell Relay over L2TPv3
Example, page 63
• Configuring ATM Single Cell Relay VC Mode over L2TPv3 Example, page 64
• Configuring ATM Port Mode Cell Relay over L2TPv3 Example, page 64
• Configuring ATM Cell Packing over L2TPv3 Examples, page 64
• Configuring the Xconnect Attachment Circuit for ATM AAL5 SDU Mode over L2TPv3 Example,
page 65
• Configuring OAM Local Emulation for ATM AAL5 over L2TPv3 Example, page 65
• Configuring Protocol Demultiplexing for L2TPv3 Examples, page 65
• Configuring L2TPv3 Control Connection Authentication Examples, page 66
• Verifying an L2TPv3 Session Example, page 66
• Verifying an L2TP Control Channel Example, page 67
• Verifying ATM VP Mode Single Cell Relay over L2TPv3 Configuration Example, page 67
• Verifying ATM AAL5 SDU Mode over L2TPv3 Configuration Example, page 68
• Verifying OAM Local Emulation for ATM AAL5 over L2TPv3 Example, page 68
• Verifying ATM VCC Cell Relay over L2TPv3 Example, page 69
Configuring Frame Relay DLCI-to-DLCI Switching Example
The following is a sample configuration for switching a Frame Relay DLCI over a pseudowire:
pseudowire-class fr-xconnect
encapsulation l2tpv3
protocol l2tpv3
ip local interface Loopback0
sequencing both