Design Guide

Chapter 10 MPLS TE
CISCO ME3600X/3800X and CISCO ASR 903 as Headend and CISCO ASR
9000 as Midpoint/Tailend
Headend - CISCO ME3600X/3800Xand CISCO ASR 903 Configuration
mpls traffic-eng tunnels
!
interface Loopback0
ip address 10.1.1.1 255.255.255.255
!
interface Gig1/0
ip address 10.0.0.1 255.255.255.0
mpls traffic-eng tunnels
ip rsvp bandwidth
!
!
router ospf 1
network 10.0.0.0 0.255.255.255 area 0
mpls traffic-eng router-id Loopback0
mpls traffic-eng area 0
!
interface tunnel1
ip unnumbered loopback 0
tunnel destination 11.1.1.1
tunnel mode mpls traffic-eng
tunnel mpls traffic-eng path-option 1 dynamic
Midpoint - CISCO ASR 9000 Configuration
interface Loopback0
ipv4 address 11.1.1.1 255.255.255.255
!
interface GigabitEthernet0/2/0/0
ipv4 address 10.0.0.2 255.255.255.0
!
router ospf 1