Design Guide

Chapter 11 Link Bundling - LACP
CISCO ME3600X/3800X and CISCO ASR 903 Configuration
interface GigabitEthernet0/11
switchport trunk allowed vlan none
switchport mode trunk
channel-group 1 mode passive
!
interface Port-channel1
switchport trunk allowed vlan none
switchport mode trunk
service instance 1 ethernet
encapsulation untagged
l2protocol peer lacp
bridge-domain 1
!
CISCO ASR 9000 Configuration
interface GigabitEthernet0/2/0/32
bundle id 10 mode active
!
interface Bundle-Ether10
!
NOTE : The ME3600X should have an untagged EFP with L2protocol peering for LACP frames to accept
and process LACP frames.