Technical References

per line.
script - Show objects in script friendly form: one object
per line.
dhcp-edit-mode (formerly scope-edit-mode)
The edit mode currently in effect when editing DHCP scopes and
reservations. The valid values are 'staged' and 'synchronous'
(or 'sync'). The value 'default' will use the value configured
at the CCM server. This feature only appears in Network Registrar
6.2 and later releases.
dns-edit-mode (formerly zone-edit-mode)
The edit mode currently in effect when editing CNR zones. The
valid values are 'staged' and 'synchronous' (or 'sync'). The value
'default' will use the value configured at the CCM server.
This only appears for CNR 6.2 and later releases.
error
The error detail for the last request to the CCM server that
failed. This report is often used to get more detailed information
about why a nrcmd command failed to complete successfully.
Note: The error detail may not reflect the final result of the
nrcmd command because some commands result in multiple requests
to CCM, one or more of which may have failed and the error detail
reports only on the last failed operation (which may not be the
last operation).
groups
Displays the list of groups associated with the current user.
roles
Displays the list of roles associated with the current user.
user-name
The name of the current user. This is a read-only property.
version
Retrieves the version associated with the Network Registrar
cluster.
visibility
The session visibility setting. The default level is 5, which is
the normal operating mode. Visibility level 3 can be set to view
'expert' level properties. These additional, reserved properties
should be modified with caution. Incorrect settings for these
properties can result in network outages. The default settings
are the best choice in virtually all cases and should not be
changed, except to address a specific network issue. Changes
should not be attempted without assistance from the Cisco TAC.
Examples
Status