Technical References

the local time of the nrcmd process. Formats for the date are:

-<num><value>

where <num> is a decimal number and <value> is one of 's', 'm',

'h', 'd', 'w', in which 's' is seconds, 'm' is minutes, 'h' is

hours, 'd' is days and 'w' is weeks.

where <month> is the name or first three letters of the name of

the month, <hour> is the hour on a 24- hour clock, and <year> is

the fully-specified year or a two-digit representation in which

98 = 1998, 99 = 1999 and all other two digit values XX = 20XX.

dhcp getRelatedServers [column-separator=<string>]

The dhcp getRelatedServers command displays a table with the following

information for each associated safe failover, DNS or LDAP server:

Type

Main, Backup, DNS or LDAP

Name

DNS host name

Address

IP Address in dotted octet format

Communications

OK or INTERRUPTED

Requests

Number of outstanding requests

<cluster-name> State

Failover state of this server

Partner State

Failover state of partner

dhcp updateSms [all]

The dhcp updateSms command initiates SMS processing. To send all

leases to SMS, use the argument all; otherwise, only the new leases

activated since the last time the command ran successfully are sent.

To run this command, turn on sms-network-discovery and set

sms-library-path. The command returns an error if sms-network-discovery is

not turned on or if it is unable to load SMS library or if the optional

argument string is invalid, otherwise it returns success to indicate SMS

processing started successfully.

dhcp serverLogs show

The serverLogs show command displays the number of log files and the

maximum size for each file.

The serverLogs command allows setting the two server logging parameters,

nlogs and logsize. Either or both may be specified in the command, and

changes will only occur to the one(s) specified. When setting logsize,