Data Sheet

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 7
●
Support for Cisco LISP allows enterprises and service providers to simplify multihomed routing and scalable
any-to-any WAN connectivity while supporting data center virtual machine mobility.
●
The virtual device context (VDC) feature helps enable the virtualization of a single physical device in one or
more logical devices. Each provisioned logical device is configured and managed as if it were a separate
physical device.
●
The 7000 F3-Series module offers exceptional security and integrated hardware support for:
◦ Configurable Control-Plane Policing (CoPP), which protects the supervisor CPU from excessive traffic
◦ Access control list (ACL) counters and logging capability to provide deeper packet visibility
◦ Layer 2 to Layer 4 ACL for both IPv4 and IPv6 traffic
◦ Cisco TrustSec
®
technology and ACL processing for security group tags (SGTs)
◦ IEEE MAC security standard (IEEE 802.1AE MACsec) on ports 41 to 48
Note: This document describes capabilities of the F3-Series modular hardware. Please consult your Cisco
representative to confirm the appropriate NX-OS release required to enable these features.
Product Specifications
Table 2 lists product specifications for the 7000 F3-Series module. Tables 3 and 4 list specifications for Cisco SFP
and SFP+ transceivers installed in the module’s ports to enable connectivity over the physical medium. Refer to the
release notes for up-to-date software version information to see which optics and copper assemblies are
supported. Complete information about supported transceivers can be found at
http://www.cisco.com/en/US/products/hw/modules/ps5455/prod_models_home.html.
Table 2. Product Specifications
Item
Specification
System
Product compatibility
Supported on Cisco Nexus 7000 4-, 9- 10-, and 18-Slot Switch chassis.
Software compatibility
Contact your local account representative for software release availability
Front-panel LEDs
●
Status: Green (operational), red (faulty), or orange (module booting)
●
Link: Green (port enabled and connected), orange (port disabled), off (port enabled and not connected),
or blinking green and orange in conjunction with ID LED blue (port flagged for identification; beacon)
●
ID: Blue (operator has flagged this card for identification; beacon) or off (module not flagged)
Programming interfaces
●
XML
●
Scriptable command-line interface (CLI)
●
Cisco Data Center Network Manager (DCNM) web services
●
Python
●
Tool Command Language (TCL) Interpreter
●
Cisco Embedded Event Manager (EEM)
●
Cisco ONE Platform Kit (OnePK™)
●
OpenFlow
Physical Interfaces
Connectivity
48 ports of 1 and 10 Gigabit Ethernet (SFP and SFP+)
Maximum port density
●
768 ports of 10 Gigabit Ethernet in 7000 18-Slot chassis
●
384 ports of 10 Gigabit Ethernet in 7000 10-Slot chassis
●
336 ports of 10 Gigabit Ethernet in 7000 9-Slot chassis
●
96 ports of 10 Gigabit Ethernet in 7000 4-Slot chassis
Queues per port
4 ingress and 4 egress