User Manual

Statement 1032Lifting the Chassis
To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the handles on
modules (such as power supplies, fans, or cards); these types of handles are not designed to support the weight
of the unit.
Warning
Statement 1034Backplane Voltage
Hazardous voltage or energy is present on the backplane when the system is operating. Use caution when servicing.
Warning
Statement 1046Installing or Replacing the Unit
When installing or replacing the unit, the ground connection must always be made first and disconnected last.
Warning
Statement 1047Overheating Prevention
To prevent the system from overheating, do not operate it in an area that exceeds the maximum recommended
ambient temperature of : 104 F (40 C)
Warning
Statement 1048Rack Stabilization
Stability hazard. The rack stabilizing mechanism must be in place, or the rack must be bolted to the floor before
you slide the unit out for servicing. Failure to stabilize the rack can cause the rack to tip over.
Warning
Regulatory Compliance and Safety InformationCisco Nexus 9000 Series
6 OL-30840-01 Rev. 4
Regulatory Compliance and Safety InformationCisco Nexus 9000 Series