User Manual
Statement 7012Equipment Interfacing with AC Power Ports
This equipment shall be connected to AC mains provided with a surge protective device (SPD) at the service
equipment complying with NFPA 70, the National Electrical Code (NEC).
Statement 7013Equipment Bonding Networks CBN
Statement 7016Battery Return Conductor
The battery return conductor of this equipment shall be treated as
Statement applies to: DC Isolated (DC-I)
Statement 7017Minimum Steady State DC Input Voltage
This equipment will operate without degradation at a minimum steady state voltage of Nominal 240DCV
(192DCV-288DCV) or 380DCV (260DVC-400DCV). The nominal DC input voltage rating is .
Statement applies to: 192DCV
Statement 8015Installation Location Network
Telecommunications Facilities
This equipment is suitable for installation in Network Telecommunications Facilities
Statement 8016Installation Location where NEC applies
This equipment is suitable for installation in locations where the NEC applies.
Regulatory Compliance and Safety InformationCisco Nexus 9000 Series
OL-30840-01 Rev. 4 11
Regulatory Compliance and Safety InformationCisco Nexus 9000 Series