User Manual

Statement 1017Restricted Area
This unit is intended for installation in restricted access areas. A restricted access area can be accessed only
through the use of a special tool, lock and key, or other means of security.
Warning
Statement 1018Supply Circuit
Take care when connecting units to the supply circuit so that wiring is not overloaded.
Warning
Statement 1024Ground Conductor
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence of
a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if
you are uncertain that suitable grounding is available.
Warning
Statement 1029Blank Faceplates and Cover Panels
Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous voltages
and currents inside the chassis; they contain electromagnetic interference (EMI) that might disrupt other equipment;
and they direct the flow of cooling air through the chassis. Do not operate the system unless all cards, faceplates,
front covers, and rear covers are in place.
Warning
Statement 1030Equipment Installation
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Regulatory Compliance and Safety InformationCisco Nexus 9000 Series
OL-30840-01 Rev. 4 5
Regulatory Compliance and Safety InformationCisco Nexus 9000 Series