Release Notes

21
Cisco Prime Network 4.1 Release Notes
OL-31014-01
Prime Network 4.1 Bugs
Table 16 Resolved Bugs in Cisco Prime Network 4.1
Bug ID Description
CSCuc44069 Satellite IC port status participating in ICLs does not have status populated on
initial investigation of VNE. Satellite ICL Link is not seen in the map.
CSCuh45319 Prime Network incorrectly creates topological links between multi-chassis devices.
CSCuh40148 ASR 901: MPLS label range in activation script is different from the range
supported on the device.
CSCuh40153 ASR 903: MPLS label range in activation script is different from the range
supported on the device.
CSCuh40597 Updating global configuration for mpls tp contains incorrect range.
CSCuh41349 Changing SONET port status using a script throws an error on ASR 9000/903
devices.
CSCuh54976 When executing the Update Interface Configuration script, a Beanshell error is
received and the VOID is used.
CSCug85781 Duplicate BFD connectivity down service alarms on LAG interfaces.
CSCug57930 When LDP is configured on VLAN, VRF, or LAG sub-interface, Prime Network
fails to correlate the LDP neighbor down to the root cause event.
CSCuh50660 When LACP channel is split between cards and one of the cards is removed, the
channel stays in up state and a low priority member down ticket is created. When
the card is inserted the card out ticket is cleared as expected, but the low priority
member down ticket is not cleared.
CSCuh85023 "MPLS TE FRR State Changed to Active/Ready" service alarm is not correlated
properly. Sometimes it is created as standalone ticket, and sometimes it is correlated
to root cause such as "Port up" or "Port down due to ..." ticket.
CSCuh57971 Prime Network Vision client memory consumption reaches 100% and the client
crashes.
CSCuh85126 AVM error log fills up with errors similar to this:
ERROR [06 28 2013 16:24:13.555 CDT] - L1MH.onValidateTests -
[Ljava.lang.Object;@78be2d
The log rolls over every few minutes.
CSCuh88748 When trying to open the inventory of a VNE from the Administration GUI, out of
memory occurs.
CSCuj20106 After upgrading from Prime Network 3.x to 4.0, the Compliance engine does not
start up.
CSCug68959 Device added with Generic VNE scheme prior to upgrade of Prime Network 3.10
or Prime Network 3.11, is modeled with Product scheme post upgrade.
CSCuh79519 Upgrade fails and Java VM crashes.
CSCuh44996 ivne_install.pl script does not provide information as to why the IVNE install fails
when downloading the DP in ASCII mode.
CSCuh08368 MPLS Label range incorrect in CPT when trying to add via LSE command.
CSCuh82489 Execution of MPLS_TP Add Configuration Link command fails.
CSCuh14256 Edit command: devices specified for the source command are not selected in the
GUI when editing the command.