Release Notes

Release Notes for 200, 300, 500, and ESW2 Series Switches Firmware Version 1.3.0 13
Release Notes
Problem: Given a stack configuration with the stack master as unit #2. On the Port
Vlan Membership page of the web-based interface, changing the value on the
Interface Type drop-down, the drop-down returns to unit #1. The information
displayed on the rest of the page belongs to the ports of the unit that was selected
using the drop-down. (CQ 141909)
Solution: There is no workaround.
Problem: The routing resource "Used number of hosts" is not displayed correctly.
This is just a display issue, there is no user impact. (CQ 133802)
Solution: There is no workaround.
Problem: In Layer 3 mode, SNTP Broadcast can only be operated from the CLI.
Solution: There is no workaround.
Problem: The EEE operational status should become disabled when Auto
Negotiation is disabled. (CQ132106 )
Solution: When the speed on a port is 1 Gigabit, auto negotiation has no effect on
the EEE functioning state.
Problem: The Voice VLAN should be prevented from being set as Guest VLAN,
and the user should receive a warning. This is not happening. (CQ132684)
Solution: Avoid setting the Voice VLAN as guest VLAN and vice-versa.
Problem: When the Mrouter learning mode is changed between "user defined"
to "auto" and vice-versa, the IGMP Querier election process doesn't start.
(CQ132805)
Solution: Disable IGMP Snooping and re-enable again, every time the Mrouter
learning mode is changed to start the Querier election process.
Problem: Some WEB GUI pages require full version compatibility of JRE, Browser
and JRE-Browser applets. For XML compatibility reasons, MSXML DLL Version 6 is
required for IE browser users.
Solution: For download and installation please refer the following link:
www.microsoft.com/downloads/details.aspx?FamilyID=993C0BCF-3BCF-4009-
BE21-27E85E1857B1&displaylang=en