Release Notes

ManualsBrandsCisco ManualsSwitchesCisco SF220-48P 48-Port 10 100 PoE Smart Plus Switch

Release Notes for the Cisco 220 Series Smart Plus Switches Firmware Version 1.1.0.14 1

Release Notes

Release Notes for the Cisco 220 Series Smart

Plus Switches Firmware Version 1.1.0.14

October 31, 2016

These Release Notes provide information about what’s new and known issues that

apply to firmware version 1.1.0.14 for the products that the following table lists:

These caveats apply to:

• Firmware version: 1.1.0.14

• Bootloader version for 24-port switches: u-boot-Sx220-24-1.0.0.6.bin

• Bootloader version for 48-port switches: u-boot-Sx220-48-1.0.0.6.bin

Model Description Ports

SF220-24 24-Port 10/100 Smart Plus Switch fa1-fa24, g1-g2

SF220-24P 24-Port 10/100 PoE Smart Plus Switch fa1-fa24, g1-g2

SF220-48 48-Port 10/100 Smart Plus Switch fa1-fa48, g1-g2

SF220-48P 48-Port 10/100 PoE Smart Plus Switch fa1-fa48, g1-g2

SG220-26 26-Port Gigabit Smart Plus Switch g1-g26

SG220-26P 26-Port Gigabit PoE Smart Plus Switch g1-g26

SG220-50 50-Port Gigabit Smart Plus Switch g1-g50

SG220-50P 50-Port Gigabit PoE Smart Plus Switch g1-g50

SG220-28 28-Port Gigabit Smart Plus Switch g1-g28

SG220-28MP 28-Port Gigabit PoE Smart Plus Switch g1-g28

SG220-52 52-Port Gigabit Smart Plus Switch g1-g52

Summary of content (4 pages)

PAGE 1
Release Notes Release Notes for the Cisco 220 Series Smart Plus Switches Firmware Version 1.1.0.14 October 31, 2016 These Release Notes provide information about what’s new and known issues that apply to firmware version 1.1.0.
PAGE 2
Release Notes TIP As with any firmware release, please read these release notes before upgrading the firmware. We also recommend that you back up your configuration before any firmware upgrade. For detailed information about upgrading the firmware, see the “Upgrading the Firmware Image” section in the administration guide for this release. What’s New in This Release • • 2 802.
PAGE 3
Release Notes Resolved Issues The following table lists the resolved issues in firmware version 1.1.0.14: Ref Number Description CSCun61800 Ethechannel CLI—Output needs modification CSCux68093 Support IF-MIB 64-bit counters CSCux68099 Using autoconfig method, bad config file is not rejected CSCuy32960 “show tech” output stops and prompts with “--More--” Known Issues The following table lists the known issues in firmware version 1.1.0.
PAGE 4
Release Notes Related Information Support Cisco Support Community www.cisco.com/go/smallbizsupport Cisco Support and Resources www.cisco.com/go/smallbizhelp Phone Support Contacts www.cisco.com/en/US/support/ tsd_cisco_small_business _support_center_contacts.html Cisco Firmware Downloads www.cisco.com/go/smallbizfirmware Select a link to download firmware for Cisco Products. No login is required. Cisco Open Source Requests www.cisco.