Manualshelf

Release Notes

ManualsBrandsCisco ManualsSwitchesCisco SF220-48P 48-Port 10 100 PoE Smart Plus Switch
1234
Release Notes for the Cisco 220 Series Smart Plus Switches Firmware Version 1.1.0.14 3
Release Notes
Resolved Issues
The following table lists the resolved issues in firmware version 1.1.0.14:
Known Issues
The following table lists the known issues in firmware version 1.1.0.14:
Ref Number Description
CSCun61800 Ethechannel CLI—Output needs modification
CSCux68093 Support IF-MIB 64-bit counters
CSCux68099 Using autoconfig method, bad config file is not rejected
CSCuy32960 “show tech” output stops and prompts with “--More--”
Ref Number Description
CSCuy16641 Port input error counters increment when receiving packets
are dropped due to Spanning Tree or VLAN mismatch.
Workaround: None.
CSCun69641 All users logged in to the switch using the RADIUS server for
authentication have the same privilege level (level 15),
regardless of their privilege levels defined on the RADIUS
server.
Workaround: None.
CSCun69651 Ingress rate limit with a small rate setting such as 512 Kbps
may not take effect immediately due to the ingress bandwidth
burst capability (8 MB burst size).
Workaround: None.