Release Notes

6 Rel Notes for SF250, SG250, SF350, SG350, SG350X, SG350XG, SF550X, SG550X, and SG550XG Series Switches, 2.2.5.68
Release Notes
Open Bugs in Software Version 2.2.0.66
This section lists that bugs that are acknowledged in software version 2.2.0.66:
CSCva97586 Symptom: RSPAN—If traffic is simultaneously forwarded to
a destination port due to a mirror operation and another
operation (such as regular forwarding), not all traffic is mirrored
to the RSPAN destination port
Workaround: There is no workaround.
CSCva97588 Symptom: SNA—When logging in to a device with an IPv6
address using Win10 Edge, cannot view network topology.
Workaround: Use an IPv4 address or other browsers to
connect.
CSCva97591 Symptom: SNA—If devices have different times, selecting
any statistics in “Connection Explorer” with interfaces selected
for devices with different clock times shows incorrect graphs.
Workaround: Make sure that all devices have synchronized
clocks (for example, via SNTP).
CSCva97601 Symptom: Cannot upgrade firmware and configuration file
from an SNA device to devices with version V2.1 or lower.
Workaround: Download of firmware to versions earlier than
2.2 is not supported.
CSCva97603 Symptom: If the last physical interface in a VLAN is set to L3
mode and then back to L2 mode, the VLAN status stays down.
Workaround: Perform a shutdown/no shutdown on the
physical interface.
CSCva97605 Symptom: Upgrading boards running version 2.2.0.x to
version 2.2.5.x is not possible via XMODEM.
Workaround: Use TFTP for upgrading from version 2.2.0.x to
version 2.2.5.x.
Table 1 Open Bugs in Software Version 2.2.5.68 (Continued)
Bug ID Description