Release Note

2 Release Notes for Cisco SGE2000/2000P Firmware Version 3.01
Release Notes
New and Changed Information
Firmware versions 3.0.0.18
• Corrects the condition where the SFP ports in a stack do not automatically
come back up after the backup master becomes the master, or the original
master rejoins the stack.
• The number of maximum allowed static routes was decreased from 128
routes to 60 routes, but the product documentation has not been updated to
reflect this change. If a user attepts to add more than 60 static routes, the
the error message "IP routing table overflow" displays. (CSCti16222)
Limitations and Restrictions
• Devices running phase 1 (1.0.x.y) firmware must be upgraded to firmware
version 3.0.0.17 using the EasyUpgrade first before upgrading to firmware
version 3.0.0.18 using the regular upgrade procedure. Refer to the release
notes for firmware 3.0.0.17 and the EasyUpgrade documentation for details.
• Devices running version 3.0.0.18 may see an error message "IP routing table
overflow” when adding static routes. The number of maximum allowed
static routes was reduced from 128 to 60, and attempting to add more than
60 results in the error message.
Related Information
Support
Cisco Small Business
Support Community
www.cisco.com/go/smallbizsupport
Cisco Small Business
Support and Resources
www.cisco.com/go/smallbizhelp
Phone Support Contacts www.cisco.com/en/US/support/
tsd_cisco_small_business
_support_center_contacts.html