Maintenance Manual

Overlaid
text
Allow various in-conference features to
be enabled or disabled.
Depending on the check boxes that are selected, in-
conference messages appear:
■ Conference status: messages appear when the
conference's scheduled end time is approaching
and when other participants join and leave the
conference. Status messages can also be played
for example when you are the only participant in a
conference
■ Conference timing: a message appears when the
conference's scheduled end time is approaching
■ Join and leave indications: messages appear
when other participants join and leave the
conference
■ Text messages: allows a message sent using the
web interface to be displayed on participants'
endpoints
■ Content channel text chat: messages that users
can send one another via the content channel are
displayed on participants' endpoints. Note that this
functionality is only available if the web
conferencing option (WCO) is activated on your
MCU.
Overlaid
logo
duration
This setting controls for how long (if at
all) the Cisco logo is displayed to
participants joining a conference. When
displayed, the logo appears in the
bottom right of a participant's
conference display. Choose from:
■ <never show>
■ 5 seconds
■ 10 seconds
■ 1 minute
■ <permanent>
This field only applies to the MCU 4500 Series and MCU
MSE 8510.
Conference
welcome
message
Allows you to enter a message that will
be seen by participants joining
conferences on the MCU. The message
is displayed at the bottom of a
participant's conference display.
The duration of the message is configured using the
Conference welcome message duration control.
Conference
welcome
message
duration
This setting controls for how long (if at
all) participants joining a conference
will see the conference welcome
message. Choose from:
■ <never show>
■ 5 seconds
■ 10 seconds
■ 1 minute
■ <permanent>
If you want streaming viewers to see the welcome
message, you must configure the duration as permanent.
155
Cisco TelePresence MCU Series Online Printable Help