User Guide
41
D14582.09 User guide Prole Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300
All contents are copyright © 2010–2013 Cisco Systems, Inc. All rights reserved. Version TC6.0, 01.2013
Cisco TelePresence System Prole Series, Codec C Series, Quick Set C20, SX20 Quick Set, MX200, MX300 User guide
www.cisco.com
Settings > Administrator Settings > Call Settings
Call Settings
The Call Settings window lets you specify:
If you set this to On, the
system will respond automatically to incoming
calls. Note that the microphone will NOT be muted.
If risk of eavesdropping is an issue, you may want
to set this setting to O.
Specify the time until your
system actually responds to an incoming call.
If your connection has limited
capacity you may want to use this setting.
You may
specify these separately. May come in handy if
you are on an
Specify which protocol to
use as default.
Note how the settings chosen are indicated. In the
example shown, is set to O.
Table of Contents
Getting started
Video meetings
Scheduled meetings
Managing Contacts