Datasheet

© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 4
Product End-of-Life Notice
End-of-Sale and End-of-Life Announcement for the Cisco Unified
Communications Manager 7.0
EOL6897
Cisco announces the end-of-sale and end-of life dates for the Cisco
®
Unified Communications Manager
7.0. The last day to order the affected product(s) is April 12, 2010. Customers with active service contracts
will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of
the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected
product(s). Table 2 lists the product part numbers affected by this announcement. For customers with
active and paid service and support contracts, support will be available until the termination date of the
contract, even if this date exceeds the Last Date of Support shown in Table 1.
Table 1. End-of-Life Milestones and Dates for the Cisco Unified Communications Manager 7.0
Milestone Definition Date
End-of-Life Announcement
Date
The date the document that announces the end of sale and end of life of a product is
distributed to the general public.
October 12, 2009
End-of-Sale Date The last date to order the product through Cisco point-of-sale mechanisms. The product is
no longer for sale after this date.
April 12, 2010
Last Ship Date:
App. SW, HW
The last-possible ship date that can be requested of Cisco and/or its contract
manufacturers. Actual ship date is dependent on lead time.
July 11, 2010
End of SW Maintenance
Releases Date:
App. SW, HW
The last date that Cisco Engineering may release any final software maintenance releases
or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or
test the product software.
April 12, 2011
End of Routine Failure
Analysis Date:
HW
The last-possible date a routine failure analysis may be performed to determine the cause
of product failure or defect.
April 12, 2011
End of New Service
Attachment Date:
App. SW, HW
For equipment and software that is not covered by a service-and-support contract, this is
the last date to order a new service-and-support contract or add the equipment and/or
software to an existing service-and-support contract.
April 12, 2011
End of Service Contract
Renewal Date:
App. SW
The last date to extend or renew a service contract for the product. July 8, 2012
End of Service Contract
Renewal Date:
HW
The last date to extend or renew a service contract for the product. July 8, 2014
Last Date of Support:
App. SW
The last date to receive service and support for the product. After this date, all support
services for the product are unavailable, and the product becomes obsolete.
April 11, 2013
Last Date of Support:
HW
The last date to receive service and support for the product. After this date, all support
services for the product are unavailable, and the product becomes obsolete.
April 11, 2015
HW = Hardware OS SW = Operating System Software App. SW = Application Software
Table 2. Product Part Numbers Affected by This Announcement
End-of-Sale Product
Part Number
Product Description Replacement Product Part
Number
Replacement Product Description
CM7.0-K9-380D SW only, CUCM 7.0 for HP DL380-G4/G5-
2CPU or 7845-H1/H2
CM7.1-K9-380G5D SW Only, Unified CM 7.1 For HP
DL380-G5 /2CPU or 7845-H2
CM7.0-K9-7816 SW only, Unified CM 7.0, for IBM or HP
7815/7816
There is currently no replacement
product available for this product.
CM7.0-K9-DEMO SW, Unified CM 7.0, 150 DLUs, for internal
use only, NFR
CM7.1-K9-DEMO SW Unified CM 7.1 Appliance Not For
Resale