User guide

2. Field calibration
2.3 Configuration
What is Configuration
In tab “configuration”, configure the connect mode and LED type to establish connection with LED screen
How to configure D-320/DMP-100 based digitizer
1. Select “RS232” when connecting with DB-320 or DMP-100
2. Press “open” button to set the communication parameters
3. Select COM port and baudrate from the dropdown list, and press “OK”
(1)
(3)
(2)
Image 2-6
configure D-320/DMP-100
The data bits, parity and stop bits are fixed with default value
How to configure DX-700 based digitizer
1. Select “ETHERNET” when connecting with DX-700
2. Press ”open” button to configure the Ethernet parameter
3. IP address is the same with DX-700, select the bank and output parameter, and press “OK”
R59770395 FIELD CALIBRATION SOFTWARE (FCS-100) 08/05/09
13