Datasheet

Data Sheet
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 11
Item Specification
Power and cooling AC power supplies (300W) (maximum of 2 per switch):
● Input: 100 to 240 VAC nominal (+/-10% for full range)
Input current maximum 20A
● Input current steady state
4A @ 110 VAC
2A @ 220 VAC
50 to 60 Hz nominal (+/-3 Hz for full range)
● Output:
Consumption: 80W, 0.73A@110V, 0.36A@220V
DC Power supplies (300W) (maximum of 2 per switch):
● Input: 8A @ -48V to -60V
● Output: 25A @ 12 VDC
Airflow:
● Front to rear
Safety ● UL 60950 -1
● CAN/CSA-C22.2 No. 60950 -1
● EN 60950 -1
● IEC 60950 -1
● AS/NZS 60950
● IEC 60825
● EN 60825
● 21 CFR 1040
EMC ● FCC Part 15 (CFR 47) Class A
● ICES-003 Class A
● EN55022 Class A
● CISPR22 Class A
● AS/NZS CISPR22 Class A
● VCCI Class A
● EN55024
● ETS300 386
● EN50082-1
● EN61000-3-2
● EN61000-3-3
● EN61000-6-1
● CISPR24
● NEBS
GR-63-Core NEBS Level 3
GR-1089-Core NEBS Level 3
● ETSI
ETS 300 019 Storage Class 1.1
ETS 300 019 Transportation Class 2.3
ETSI 300 019 Stationary Use Class 3.1
Ordering Information
Table 3 provides ordering information for the Cisco MDS 9124.
Table 3. Ordering Information for the Cisco MDS 9124
Product Description Part Number
Cisco Direct Orders Only
Cisco MDS 9124 24-Port Fabric Switch with 8 4-Gbps active ports, VSANs, PortChannels, Cisco DCNM for SAN Essentials
Edition, one AC Power Supply, 8 4/2/1-Gbps Fibre Channel-SW SFP transceivers, and generic Cisco Accessory Kit. Option
to order second AC Power Supply, configure-to-order (CTO)
DS-C9124AP-K9
Cisco MDS 9124 8 port upgrade Kit; On-Demand Port Activation license (uninstalled . . . see Note 1)) to activate increment
of 8 ports and 8 4/2/1-Gbps Fibre Channel-SW SFP transceivers, configure-to-order (CTO)
M9124PL8-4G-AP
Cisco MDS 9124 8 port upgrade Kit; On-Demand Port Activation license to activate increment of 8 ports and 8 4/2/1-Gbps
Fibre Channel-SW SFP transceivers, spare
M9124PL8-4G-AP=