Product manual

Front Panel

1 Power Turns the receiver on or places it in standby. To restart the receiver,

press and hold the POWER button for 10 seconds. The LED is green

2 Model Number Identi es the model number of your receiver as ISB7000 or ISB7500

3 Link Indicates network link status. The LED is green

4 HD Indicates the set-top is set to a resolution of 720p, 1080i, or 1080p.

The LED is blue

5 Record Indicates that a recording is in progress. The LED is red

6 IR Sensor Receives the infrared signal from the remote control. The sensor is

behind the front panel

7 Menu Accesses the on-screen menu

8 Arrow Keys Accesses on-screen services (such as the on-screen guide, video-on-

demand, or pay-per-view) and navigates menus

9 OK Selects the current item

10 USB Port USB connector. (Reserved for future use)

Note: This illustration may vary from the actual product.

CAUTION:

Your receiver may be equipped with a hard disk drive to store programs that

you record and to allow you to rewind and pause live TV. Any time the receiver

is powered on (power LED is illuminated) or a recording is in progress (the

record LED is illuminated) the hard disk drive is in use.

If you need to move the receiver, complete the following steps to allow the

hard disk drive to shut down properly. First, make sure that no recording is

in progress (record LED is o ). Then, turn o power by pressing the Power

key. Finally, unplug the unit and wait 10 seconds for the hard disk drive to

spin down (stop). At this point the unit can be moved safely.

You should handle this product with the same level of care you would use

when handling other electronics containing a hard disk drive, such as a

laptop computer or other hard disk drive-equipped devices.

ISB7500

T15904

1 92 3 4 5 6 7 108