User Guide Linksys EA-Series
Linksys EA-Series Contents Contents Product overview Setting Up: Advanced EA2700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 EA3500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 EA4500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 How to open the browser-based utility . . . . . . . . . . . . . . . 20 How to manually set up your router . . . . . . . . . . . . . . . . .
Linksys EA-Series Contents Improving Security Port Forwarding and Port Triggering How do I know if my network is secure? . . . . . . . . . . . . . . . 37 Network security following a manual setup . . . . . . . . . . . . 37 How to set up wireless security using Wi‑Fi Protected Setup . . 38 How to set up port forwarding . . . . . . . . . . . . . . . . . . . .
Linksys EA-Series Product overview EA2700 Product overview The power of dual band Double your network bandwidth with simultaneous dual-band N (2.4 and 5 GHz). The dual-band feature is designed to avoid interference and optimize throughput for smoother and faster HD video streaming, file transfers, and wireless gaming. Advanced security Keep Wi-Fi freeloaders and Internet threats at bay with WPA2 encryption and SPI firewall to help keep your network protected.
Linksys EA-Series Product overview Back view Port activity indicator Yellow network activity indicator Green network activity indicator Power port Internet port Ethernet ports •• Network or Internet port Power indicator Wi-Fi Protected Setup button Ethernet ports—Connect Ethernet cables (also called network cables) to these Gigabit Ethernet (10/100/1000) ports, color coded blue, and to wired Ethernet network devices on your network.
Linksys EA-Series EA3500 Product overview The power of dual band Double your network bandwidth with simultaneous dual-band N (2.4 and 5 GHz). The dual-band feature is designed to avoid interference and optimize throughput for smoother and faster HD video streaming, file transfers, and wireless gaming. SpeedBoost Higher quality antenna technology helps maintain high speeds across greater distances throughout your home.
Linksys EA-Series Product overview Parental controls •• Wi-Fi Protected Setup™ button—Press this button to easily configure wireless security on Wi-Fi Protected Setup-enabled network devices. For more information, see “How to set up wireless security using Wi‑Fi Protected Setup” on page 38. •• Power indicator—Stays on steadily while power is connected and following a Wi-Fi Protected Setup connection. Flashes slowly during bootup, during firmware upgrades, and during a Wi‑Fi Protected Setup connection.
Linksys EA-Series Product overview Bottom view •• Reset button—Press and hold this button for 5-15 seconds (until the port lights flash at the same time) to reset the router to its factory defaults. You can also restore the defaults using the browser-based utility. For more information, see “How to restore factory defaults” on page 56.
Linksys EA-Series EA4500 Product overview The power of dual band Double your network bandwidth with simultaneous dual-band N (2.4 and 5 GHz). The dual-band feature is designed to avoid interference and optimize throughput for smoother and faster HD video streaming, file transfers, and wireless gaming. SpeedBoost Higher quality antenna technology helps maintain high speeds across greater distances throughout your home.
Linksys EA-Series Product overview Back view IPv6 enabled Supports the latest Internet protocol technology to future-proof your network. Easy to manage Cisco Connect software helps you customize your settings and quickly add multiple devices to your network: Separate guest network Ethernet ports Create a separate, password-protected network for guests.
Linksys EA-Series Product overview •• Reset button—Press and hold this button for 5-15 seconds (until the port lights flash at the same time) to reset the router to its factory defaults. You can also restore the defaults using the browser-based utility. For more information, see “How to restore factory defaults” on page 56. •• Power—Connect the included AC power adapter to this port. Caution Use only the adapter that came with your router.
Linksys EA-Series Setting Up: Basics Setting Up: Basics How to create a home network For ALL What is a network? A network is any group of devices that can communicate with each other. A home network can also include Internet access, which requires a router like this one. A typical home network may include multiple computers, a printer, a modem, and a router.
Linksys EA-Series How to start Cisco Connect When you run the setup CD, Cisco Connect (your router’s setup software) is automatically installed onto your computer. You can then use Cisco Connect to easily manage your router. To install Cisco Connect on another computer after your router has been set up, see “How to install Cisco Connect on another computer” on page 12. Notes: Your Cisco Connect CD works with only this router model. If you lose your setup CD, you can download the software from Linksys.
Linksys EA-Series How to improve your wireless connection speed For ALL Follow these tips to improve your network’s wireless connection speed: •• Make sure that your router is in a good location: •• For the widest coverage area, install your router near the center of your home, and near the ceiling, if possible. Setting Up: Basics How to test your Internet connection speed For ALL To test your Internet connection speed: 1. Run Cisco Connect, then click Change under Router settings.
Linksys EA-Series How to connect devices to your network For Setting Up: Basics 2. Click Computer. ALL How to connect a computer to your network You can connect a computer to your network using an Easy Setup Key (the easiest way) or manually. How to connect a computer using an Easy Setup Key To use an Easy Setup Key, you first need to create one using any available USB drive. After it has been created, you can use the same key to connect several computers to your network.
Linksys EA-Series Setting Up: Basics To use your Easy Setup Key to connect a computer to your network: To manually connect a computer to your network: 1. Run Cisco Connect, then click Add device under Computers and devices. The Computers and other devices screen opens. 1. Run Cisco Connect, then click Add device under Computers and devices. The Computers and other devices screen opens. 2. Click Computer. 2. Click Computer. 3. Select Yes, I have an Easy Setup Key, then click Next.
Linksys EA-Series How to connect a printer When you install a printer that requires a cable, you can: •• Follow the printer’s instructions for setting it up, then follow your computer’s operating system instructions to share the printer with your network. TIP Setting up your printer this way does not require Cisco Connect. - OR - •• If your router is a Linksys EA3500 or EA4500, you can connect a USB printer to the router’s USB port to make the printer available to any networked computer.
Linksys EA-Series Because of the wide variety of devices and methods of connecting, you must manually enter network information into the devices for a successful network connection. To manually connect a device to your network: 1. Run Cisco Connect, then click Add device under Computers and devices. The Computers and other devices screen opens. Setting Up: Basics 4. Follow your device’s instructions for entering the wireless network information into the device. 5.
Linksys EA-Series How to access parental controls Setting Up: Basics The Parental controls main screen appears. The first time you try to access parental controls, you are asked to set a password. To access parental controls for the first time: 1. Run Cisco Connect, then click Change under Parental controls. The Parental controls password screen opens. To change the parental controls password: 1.
Linksys EA-Series Setting Up: Basics How to select the computers to have parental controls •• It’s not necessary to set parental controls over each computer on your home network. You can set the controls on only those computers that children can access. 3. To create or change a list of specific websites to block, click Edit next to Block specific sites. The Block these sites screen opens. Specific times blocks Internet access only during specific times.
Linksys EA-Series Setting Up: Basics How to set up guest access to your network For To set up guest access to your network: 1. Run Cisco Connect, then click Change under Guest Access. The Guest Access screen opens. ALL You can use your router’s guest access feature to provide your guests with access to the Internet, while restricting their access to other resources on your local network. The guest network is shown as an open, unsecure wireless network that your guests can easily connect to.
Linksys EA-Series 4. In the Total guests allowed drop-down box, select the number of simultaneous guest network users you want to allow. 5. Click Finish to apply your changes. Tip The first time your guest tries to access the Internet through a web browser, they will see the Guest access screen. To continue, they must enter the password you provided in the Password field, then click LOGIN.
Linksys EA-Series Setting Up: Advanced Setting Up: Advanced How to open the browser-based utility For ALL To access some advanced settings, you need to open the browser-based utility. Caution If you change settings in the browser-based utility, you might not be able to run Cisco Connect later. 2. Enter the user name and password, then click OK. The utility’s main menu opens. Tips If you set up your router without using Cisco Connect, your router’s default username and password is admin.
Linksys EA-Series How to manually set up your router For ALL Although running Cisco Connect is the easiest way to set up and maintain your router, advanced users may want to manually configure their router. Be careful when changing settings using this method. To manually set up your router: Setting Up: Advanced How to manually set up your Internet connection In most cases, Cisco Connect automatically sets up your Internet connection (see “How to start Cisco Connect” on page 10).
Linksys EA-Series IPv6 Internet connection settings For ALL IPv6 is a new IP protocol that uses simplified packet headers and requires IPSec. It also has improved support for mobile IP and computing devices. If your router model supports IPv6, an IPv6 Setup page is available under the Setup tab. Note To use your router’s IPv6 Internet connection settings, IPv6 service from your ISP (Internet service provider) is required. For more information on this service, ask your ISP.
Linksys EA-Series Split your traffic Setting Up: Advanced 3. Click Manual. This enables you to make changes to all of the fields below. The best way to improve your multimedia wireless performance is to split your wireless traffic between your router’s two bands (ranges of radio frequencies). Your router supports the 2.4 GHz band and the 5 GHz band, and handles the two bands as two separate wireless networks to help manage the traffic. The most common way to split wireless traffic is to use the 2.
Linksys EA-Series Setting Up: Advanced Your wireless clients support the 40 MHz mode (sometimes called Bonded mode) in which two 20 MHz channels are bonded together for better performance. •• There is no adjacent interference. How to set up the DHCP server on your router With more available channels and less chance of interference on the 5 GHz band, you have the option to force the 40MHz mode.
Linksys EA-Series How to set up DHCP reservation Why would I use it? DHCP reservation allows you to assign a unique, fixed IP address to a specific device on your network. Assigning a fixed IP address is a good way to manage devices such as print servers, web cameras, network printers, and game consoles. A fixed IP address is also recommended if you want to use port forwarding for devices that need to receive inbound traffic from the Internet (“How to set up port forwarding” on page 52).
Linksys EA-Series 5. Complete the fields with information provided by your DDNS provider, then click Save Settings. The Status field tells you what actions have been taken. Setting Up: Advanced How to clone a MAC address For ALL On any home network, each network device has a unique MAC (Media Access Control) address. Some ISPs register the MAC address of the device (usually a router or a computer) connected directly to the modem.
Linksys EA-Series How to connect to your corporate office using a VPN For ALL What is a VPN, and do I need to change my router settings? A VPN (Virtual Private Network) is a network that uses a public network, such as the Internet, to provide secure communications between a remote computer and another network. Corporations often provide VPN access to their networks to enable employees to work from remote offices or while traveling.
Linksys EA-Series To configure QOS: Applications & Gaming > QoS 1. Log into the browser-based utility (see “How to open the browser-based utility” on page 20). 2. Click the Applications & Gaming tab, then click the QoS page. Setting Up: Advanced Tip Do not set all priorities to High, because all items will have the same priority, and it would be easier to disable Internet Access Priority for the same result. •• Applications and Online Games—Let you assign a priority for an application or online game.
Linksys EA-Series Setting Up: Advanced 7. Configure Upstream Bandwidth. •• To allow the router to detect the maximum, select Auto (default). Auto sets speeds in multiples of 512 Kbps. 7. For Remote Management Port, keep the setting of 8080 (default) unless you already have a device on your network that uses port 8080 (such as a web camera). •• To specify the maximum, select Manual, then select the bandwidth 8. Click Save Settings at the bottom of the screen to accept your changes. you want it to use.
Linksys EA-Series How to enable Voice over IP on your network For ALL Do I need to configure Voice over IP? VoIP (Voice over Internet Protocol) is a technology for using the Internet as an interface for telephone communications. To use VoIP, you need to get an account with a VoIP service provider. The VoIP service provider typically provides you with a telephone adapter (TA) that connects to your network. If you do not use your network to make phone calls, you don’t need to change the default settings.
Linksys EA-Series How to use a router as an access point How can I use this new router as an access point? If you have a large area to cover with your wireless signal, or if part of your home has weak signals due to interference, you can use this router to extend the range of your old router’s wireless network. For ALL To set up your new router as an access point: Setup > Basic Setup 1.
Linksys EA-Series Setting Up: Advanced 2. Open the setup page for the local network (LAN). Caution Do not connect the cable to the Internet port on your old router. If you do, you may not be able to set up the router as an access point on the current network. 3. In the Router IP address field, enter an unused IP address for the LAN network of your new router. For example, if your new router has an IP address of 192.168.1.1, you should choose an IP address on the 192.168.1.0 network.
Linksys EA-Series 3. Follow the on-screen instructions until setup is complete. Setting Up: Advanced To determine the address range by using a Mac computer: a. Connect your computer into your upstream network’s router. To share an Internet connection b. From the Dock, click System preferences, click Network, then click Ethernet in the window to the left. A network status window appears. Note This is a complex process, so this procedure assumes that you have some networking knowledge.
Linksys EA-Series 2. Connect an Ethernet network cable to a LAN/Ethernet port on your upstream network to the yellow Internet port on your router. Caution Connect the upstream network to your router’s yellow Internet port, not one of the blue Ethernet ports. If you connect to an Ethernet port, you create IP addressing problems for the office network. Tips An office network often has a wall plate with an Ethernet port that you can connect to.
Linksys EA-Series To extend your network or add wireless capabilities: 1. If you want to extend your network, you may also follow the instructions above. One example of this might be to provide a separate wireless network for your children to keep their wireless network traffic separate from your wireless network. You might also want to isolate one network from another network so that network shares aren’t visible across networks.
Linksys EA-Series Setting Up: Advanced c. In the Destination section, select MAC Address, then click DHCP Client Table. A separate window opens showing the current DHCP client list. Tip The DHCP Client Table is only available if you select MAC Address. d. Click Select next to the device that you want to place in the DMZ. In this example, the first device was selected. The corresponding MAC address was copied into the MAC Address field as shown below. e. Click Save Settings to apply your changes.
Linksys EA-Series Improving Security Improving Security How do I know if my network is secure? For ALL If you configured your router using Cisco Connect, your network is secure. During setup, Cisco Connect creates a name for your network, enables industrystandard WPA/WPA2 wireless security, and assigns a highly secure password for your wireless network and the administrator’s account. To confirm that your network is secure: 1. Run Cisco Connect.
Linksys EA-Series To manually set your router’s wireless security settings: Wireless > Wireless Settings 1. Log into the browser-based utility (see “How to open the browser-based utility” on page 20). 2. Click the Wireless tab, then click the Wireless Settings page. 3. Select your preferred security type from the Security Mode drop-down list For most home networks, we recommend WPA2/WPA Mixed Mode. 4. Enter a passphrase (security key) for your wireless network in the Passphrase field.
Linksys EA-Series How to connect a device using its Wi-Fi Protected Setup PIN Improving Security 4. On the client device, enter the PIN listed on the router’s Wi-Fi Protected Setup screen. It is also listed on the bottom of the router. In the example below, the router’s PIN is 32744781. Use this method if your device has a Wi-Fi Protected Setup PIN (Personal Identification Number). To connect a device using the device’s Wi-Fi Protected Setup PIN: Wireless > Wireless Settings 1.
Linksys EA-Series How to control access to your wireless network For Improving Security 4. Select Permit. ALL Why would I need to control access to my wireless network? If you used Cisco Connect to configure your router, your wireless network is already secure. By default, Cisco Connect enables industry-standard WPA (Wi-Fi Protected Access) security using WPA2/WPA mixed mode. Cisco Connect configures your network with a complex, 10-character password that is almost impossible to compromise.
Linksys EA-Series 7. Click Save Settings at the bottom of the page. 8. Click Wireless Client List again to check the updated device list. Only the device you selected remains on the network. Improving Security 3. Select each setting that you want to change. Tip For descriptions of the filters, click Help on the right side of the screen. More complete descriptions are included below. •• SPI Firewall Protection—This helps protect your local network from Internet threats. This option is enabled by default.
Linksys EA-Series IPv6 firewall settings For ALL On some router models, the IPv6 firewall lets you customize IPv6 port services for applications. When users send these types of requests to your network via the Internet, the router will allow those requests to the appropriate computers. Improving Security 4. Click Apply to save your changes. The Allowing Ports section lists the settings you have saved. 5. To change a saved setting, click Edit. To delete a saved setting, click Remove.
Linksys EA-Series Using an External Drive How to configure storage For EA3500 EA4500 Why would I need to configure storage? By default, when you connect a storage device to your router, the entire contents of the device are available for read and write access to anyone on your local network (no login credentials are required). However, you can also create shared folders that you can configure to share only with specified groups. 3. Click Create Share next to the partition you want to share.
Linksys EA-Series c. Click Save Settings at the bottom of the screen, then repeat the above steps to add more folders that you want to share. How to disable anonymous disk access By default, no password is needed for read and write access to the drive. Before you can manage group and user access to shared folders, you must disable anonymous disk access. To disable anonymous disk access: Storage > Administration 1.
Linksys EA-Series 3. Under Group Management, click Create New Group. How to create a new user Two user accounts (Admin and Guest) are preconfigured for router access. The password for the Admin user is the same password that you use to access the router. By default, the user Admin is a member of the group named Admin, and the user Guest is a member of the group named Guest.
Linksys EA-Series 6. From the Group Member drop-down list, select the group to assign the user to, then click Create. The new user is displayed in the user list. 4. In the Shared Folder section, click Edit next to the shared folder you want to change group access for. 5. To grant a group access the shared folder, click the group’s name in the Available Groups column, then click >> to move the group to the Groups with Access column. 6.
Linksys EA-Series How to configure your router’s storage for remote access For 3. Next to FTP Server, click Enabled. EA3500 EA4500 Why would I need to access my router’s storage remotely? If your router’s storage is set up for remote access, you can access your files anywhere you have an Internet connection. To do this, you must enable the router’s built-in FTP (File Transfer Protocol) server.
Linksys EA-Series How to share folders and set access rights 6. To apply your changes and enable FTP access, click Save Settings. You can select which folders to share. You can also select which users can access the folders. For more information on managing access rights, see “How to configure storage” on page 43. To configure FTP and control folder access: Storage > FTP Server 1. In the Storage tab’s FTP Server page, click Specify Folder. The FTP Folder screen opens in a separate window. 2.
Linksys EA-Series How to access files remotely For FTP software and web browsers display FTP content in many ways, but you can usually use these common actions to navigate through FTP folders: •• Click a folder name to open it. •• Click a double period (..) or Up to a higher level directory to open a parent folder. •• Click or right-click a file to download or view it. •• Drag a file from another window and drop it into the FTP window to upload it.
Linksys EA-Series 4. Enter a name for your media server in the Media Server Name box. The name must use only alphanumeric characters (letters A to Z and numbers 0 to 9) and can be up to 15 characters long. 8. To create a folder, enter a unique folder name into the New Folder box, then click Create. 5. Click Specify Folder to Scan. A new window opens. 6. In the Display Name field, enter a unique name for the media folder.
Linksys EA-Series How to connect your UPnP device to the media server After you set up your router’s media server, you need to connect an UPnPcompatible device (such as an UPnP-compatible game console or digital media player) to the network so that you can play the media server’s content. To connect an UPnP device to your router’s media server: 1. Connect your UPnP device to your home network with wired (Ethernet cable) or wireless networking.
Linksys EA-Series Port Forwarding and Port Triggering Port Forwarding and Port Triggering How to set up port forwarding For ALL 3. Click the Applications & Gaming tab, then click the Single Port Forwarding page. Why would I use port forwarding? Port forwarding is a feature that forwards inbound traffic from the Internet on a specific port or ports to a specific device or port on your local network.
Linksys EA-Series How to set up port forwarding for multiple ports Port Forwarding and Port Triggering 8. Select Enabled next to the IP Address field. Why would I set up port forwarding for multiple ports? Port forwarding is a feature that forwards inbound traffic from the Internet on a specific port to a single device on your local network. Unlike a web camera that typically only requires a single port to be forwarded, some applications require forwarding of multiple ports.
Linksys EA-Series To set up port range forwarding: Applications & Gaming > Port Range Forwarding 1. Log into the browser-based utility (see “How to open the browser-based utility” on page 20). 2. Set up a DHCP reservation for the IP address of the computer on which you installed the software. (See “How to set up the DHCP server on your router” on page 24). In this example, the IP address of the desktop computer with BitTorrent installed is 192.168.1.140. 3.
Linksys EA-Series How to configure your Xbox for online gaming For Port Forwarding and Port Triggering 4. Enter the port and protocol information as shown in the image below. ALL Why would I set up my Xbox for online gaming? Online gaming adds another dimension to using your Xbox. As with other online gaming applications and gaming consoles, you need to forward multiple ports to use your Xbox for online gaming.
Linksys EA-Series Maintaining and Monitoring Maintaining and Monitoring How to back up and restore your router configuration For ALL Why do I need to back up my router configuration? As with any valuable data, you should back up your router configuration. Your router might contain many customized settings. Those settings would be lost if you reset your router to its factory defaults, and you would need to re-enter all of them manually.
Linksys EA-Series Maintaining and Monitoring To reset your router to factory defaults with the reset button: 3. Click Restore Factory Defaults. CAUTION Whenever you restart the router, all logs that are not saved will be lost. 1. With your router connected to power and turned on, press and hold the Reset button on the bottom of your router for 5-15 seconds. A confirmation window opens. 4. Click OK.
Linksys EA-Series To upgrade the router’s firmware: For ALL Administration > Firmware Upgrade 1. Log into the browser-based utility (see “How to open the browser-based utility” on page 20). 2. Click the Administration tab, then click the Firmware Upgrade page. 3. Click Online Upgrade, select Upgrade Automatically, then click Check For Upgrades. Tip To have your router automatically check for updates, select Update Automatically.
Linksys EA-Series 3. Click the Status tab, then click the Local Network page. Your local network’s IP address information and the DHCP server settings are displayed. (Screen from IPv6-enabled router shown.) Maintaining and Monitoring How to disable the Ethernet port status lights Why would I want to disable the Ethernet port status lights? Depending on the placement of the router in a home, some users might find the lights distracting.
Linksys EA-Series How to test your Internet connection What utilities are included in my router to test my Internet connection? Your router includes two diagnostic tests, Ping and Traceroute, that let you check network connections, including network devices and your Internet connection. Maintaining and Monitoring A window opens showing the ping test results. You will see a response for each successful ping. Note If an Internet URL fails to respond to ping, it doesn’t necessarily mean that the site is down.
Linksys EA-Series A window opens with the test results. Maintaining and Monitoring 4. To view the logs, click View Log. The Log window opens. 5. Select the log you want to see from the Type drop-down list. How to configure and use logs What kind of logging capabilities does my router have? Your router can track all traffic for your Internet connection. Your router supports four types of logs: CAUTION All logs that are not saved will be lost whenever the router restarts.
Linksys EA-Series Browser-based Utility Menu Structure Browser-based Utility Menu Structure EA2700 Setup Basic Setup Language Internet Setup Internet Connection Type Optional Settings Network Setup Router Address DHCP Server Setting Time Settings Time Zone Reboot IPv6 Setup Internet Setup Internet Connection Type Network Setup DDNS 6rd Tunnel DDNS DDNS Service MAC Address Clone MAC Address Clone Advanced Routing NAT Dynamic Routing (RIP) Static Routing Wireless Wireless Settings Configur
Linksys EA-Series EA3500 Browser-based Utility Menu Structure Security Firewall Internet Filter Web Filter Setup Basic Setup Language Internet Setup Internet Connection Type Optional Settings Network Setup Router Address DHCP Server Setting Time Settings Time Zone Reboot IPv6 Setup Internet Setup Internet Connection Type Network Setup DDNS 6rd Tunnel DDNS Service MAC Address Clone Advanced Routing NAT Dynamic Routing (RIP) Static Routing Administration Firewall Wireless Settings Configu
Linksys EA-Series EA4500 Setup Basic Setup Language Internet Setup Internet Connection Type Network Setup Router Address DHCP Server Setting Time Settings Time Zone Port Lights Reboot IPv6 Setup Internet Setup Internet Connection Type Network Setup DDNS 6rd Tunnel DDNS Service MAC Address Clone Advanced Routing NAT Dynamic Routing (RIP) Static Routing Browser-based Utility Menu Structure Storage Disk Administration Disk Management Wireless Settings Configuration View 5 GHz Wireless Settin
Linksys EA2700 Specifications Specifications Linksys EA2700 Environmental Model Name Linksys EA2700 Description Dual-Band N600 Router with Gigabit Model Number EA2700 Switch Port Speed 10/100/1000 Mbps (Gigabit Ethernet) Radio Frequency 2.
Linksys EA3500 Specifications Linksys EA3500 Environmental Model Name Linksys EA3500 Description Dual-Band N750 Router with Gigabit and USB Model Number EA3500 Switch Port Speed 10/100/1000 Mbps (Gigabit Ethernet) Radio Frequency 2.
Linksys EA4500 Specifications Linksys EA4500 Environmental Dimensions 8.86” x 0.98” x 6.30” (225 x 25 x 160 mm) Unit Weight 12.7 oz (360 g) Power 12V, 2A Certifications FCC, IC, CE, Wi-Fi a/b/g/n, Windows 7, DLNA 6 (3 per band) Operating Temp. 32 to 104°F (0 to 40°C) Ports Power, USB, Internet, Ethernet (1-4) Storage Temp.
Visit linksys.com/support for award-winning 24/7 technical support Cisco, the Cisco logo, and Linksys are trademarks or registered trademarks of Cisco and/or its affiliates in the United States and other countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. All other trademarks mentioned in this document are the property of their respective owners. © 2012 Cisco and/or its affiliates. All rights reserved.
