Datasheet
Data Sheet
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 11 of 12
Support for FWSM 2.3 and 2.3
12.2(17b)SXA 2, 720 Yes Yes
12.2(17d)SXB and higher 2, 720 Yes Yes
Catalyst OS
4
7.5(x) 2 No No
7.6(1) through 7.6(4) 2 Yes No
7.6(5) and higher 2 Yes Yes
8.2(x) and higher 2, 720 Yes Yes
8.3(x) 2, 720 Yes Yes
Table 7. Product Specifications
Product Specifications
Hardware Specification
●
Weight: 10 lb
●
Power Consumption: 171.78W
Regulatory Compliance Safety
●
UL 1950
●
CSA C22.2 No. 950-95
●
EN60950
●
EN60825-1
●
TS001
●
CE Marking
●
IEC 60950
●
AS/NZS3260
Telecommunications
●
ITU-T G.610
●
ITU-T G.703
●
ITU-T G.707
●
ITU-T G.783 Sections 9-10
●
ITU-T G.784
●
ITU-T G.803
●
ITU-T G.813
●
ITU-T G.825
●
ITU-T G.826
●
ITU-T G.841
●
ITU-T G.957 Table 3
●
ITU-T G.958
●
ITU-T I.361
●
ITU-T I.363
●
ITU I.432
●
ITU-T Q.2110
●
ITU-T Q.2130
●
ITU-T Q.2140
●
ITU-T Q.2931
●
ITU-T O.151
●
ITU-T O.171
●
ETSI ETS 300 417-1-1
●
TAS SC BISDN (1998)
●
ACA TS 026 (1997)
●
BABT/TC/139 (Draft 1e)
EMI
●
FCC Part 15 Class A
4
When you use Catalyst OS on the supervisor, you can use any of the supported Cisco IOS releases above on
the MSFC. The supervisor software determines the FWSM feature support.
Autostate feature for rapid link failure detection is supported with Cisco Catalyst OS Release 8.4(1) or later and
Cisco IOS 12.2(18)SXF(5) and higher.