Datasheet

ManualsBrandsCisco ManualsNetworkingGLC-ZX-SMD=

Data Sheet

Cisco Small Form-Factor Pluggable Modules for

Gigabit Ethernet Applications

The industry-standard Cisco

Small Form-Factor Pluggable (SFP) Gigabit Interface

Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet

port or slot, linking the port with the network (Figures 1, 2 and 3). SFPs can be used

and interchanged on a wide variety of Cisco products and can be intermixed in

combinations of 1000BASE-T, 1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX,

1000BASE-ZX, or 1000BASE-BX10-D/U on a port-by-port basis.

Figure 1. Cisco optical Gigabit Ethernet SFP

Figure 2. Cisco 1000BASE-T Copper SFP

Figure 3. Cisco 2-channel 1000BASE-BX optical SFP

1000BASE-T SFP for Copper Networks

The 1000BASE-T SFP operates on standard Category 5 unshielded twisted pair copper cabling of up to 100m

(328 ft) link length. Cisco 1000BASE-T SFP modules support 10/100/1000 autonegotiation and Auto MDI/MDIX.

1000BASE-SX SFP for Multimode Fiber Only

The 1000BASE-SX SFP, compatible with the IEEE 802.3z 1000BASE-SX standard, operates on legacy 50 µm

multimode fiber links up to 550 m and on 62.5 µm Fiber Distributed Data Interface (FDDI)-grade multimode fibers

up to 220 m. It can support up to 1km over laser-optimized 50 µm multimode fiber cable.

Summary of content (6 pages)

PAGE 1
Data Sheet Cisco Small Form-Factor Pluggable Modules for Gigabit Ethernet Applications The industry-standard Cisco® Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network (Figures 1, 2 and 3).
PAGE 2
1000BASE-LX/LH SFP for Both Multimode and Single-Mode Fibers The 1000BASE-LX/LH SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers. When used over legacy multimode fiber type, the transmitter should be coupled through a mode conditioning patch cable. For details on this implementation, refer to http://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_bulletin_c25-530836.html.
PAGE 3
2-channel 1000BASE-BX10-D for Single-Fiber Bidirectional Applications The 2-channel 1000BASE-BX-D SFP module, also known as Compact SFP, integrates two IEEE 802.3ah 1000BASE-BX10-D interfaces in one SFP module. The GLC-2BX-D is always connected to two 1000BASE-BX10U interfaces over two single strands of standard SMF with an operating transmission range up to 10km. GLC-2BX-D is designed to connect to any standard-based Customer Premises Equipment (CPE) in FTTx links (Figure 5). Figure 5.
PAGE 4
Table 1. SFP Port Cabling Specifications Product Wavelength (nm) Fiber Type Core Size (µm) Modal Bandwidth * *** (MHz Km) Operating Distance (m) 1000BASE-SX 850 MMF 62.5 160 (FDDI-grade) 220 (722 ft) 62.5 200 (OM1) 275 (902 ft) 50 400 (400/400) 500 (1,640 ft) 50 500 (OM2) 550 (1,804 ft) 50 2000 (OM3) 1000 (3281 ft) 62.
PAGE 5
Environmental Conditions and Power Requirements Operating temperature range: ● Commercial temperature range (COM): 0 to 70°C (32 t o 158°F) ● Extended temperature range (EXT): -5°C to 85°C (23 to 185°F) ● Industrial temperature range (IND): -40 to 85°C (-4 0 to 185°F) ● Storage temperature range: -40 to 85°C (-40 to 185° F) Cisco SFP modules typically consume up to 1W per SFP port, with the exception of the Compact SFP (GLC-2BX-D) consuming up to 1.5W.
PAGE 6
GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors Ordering Information To place an order, visit the Cisco Ordering homepage or refer to Table 4. Table 4.