Installation Guide

5
The mount cradle has the following features:
Security Features
The MR78-HW/GR62-HW allows for physically securing the access point after installation:
1. Security screw – The accessory kit includes screws that can be used to secure the access point to the mount cradle.
Engaging the security screw prevents accidental dislodging and theft.
Ethernet Ports
The MR78-HW/GR62-HW features a Gigabit Ethernet RJ45 port that accepts 802.3at and 802.3af power (labeled “Eth0, PoE”). This port should be used for
uplink to your WAN connection.
Power Source Options
The MR78-HW/GR62-HW access point can be powered using either the Meraki AC Adapter, PoE Injector (both sold separately), or a third-party PoE switch.
The MR78-HW/GR62-HW operates at full power with 802.3af PoE.
Factory Reset Button
If the button is pressed and held for at least five seconds and then released, the MR78-HW/GR62-HW will reboot and be restored to its original factory settings
by deleting all configuration information stored on the unit.