Datasheet

Data Sheet
© 1992-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 5 of 8
Network Interface Specifications
Ethernet network interface
card (NIC)
Dual onboard 10/100/1000
Ethernet connectors Two RJ-45 connectors on rear of server
10BASE-T cable support EIA Category 3, 4, or 5 unshielded twisted-pair (UTP) (2 or 4 pair) up to 328 ft (100m)
100BASE-TX cable support EIA Category 5 UTP (2 pair) up to 328 ft (100m)
1000BASE-T cable support EIA Category 6 UTP (recommended), 5E UTP, or 5 UTP up to 328 ft (100m)
Interfaces
Serial ports 1
Parallel ports 0
USB 2.0 7
Keyboard ports Use one of the USB ports (PS/2 ports are not provided)
Mouse ports Use one of the USB ports (PS/2 ports are not provided)
Audio ports None
VGA ports 1 front and 1 rear
System management ports RJ-45 for IBM RSA2 Ethernet port
Security
●
•Power-on password
●
Privileged access password to server setup
●
Unattended boot mode, which allows keyboard to be locked to all entries except the
password
●
Selectable boot sequence
Industry Standard Compliance
●
•Multiprocessor Specification (MPS) 1.4
●
Peripheral Component Interconnect (PCI) specification 2.3
●
PCI-X specification V2.0a
Hardware-enabled to meet the International Organization for Standardization (ISO) 9241,
Part 3
Equipment Approvals and Safety
●
FCC – Verified to comply with Part 15 of the FCC Rules, Class A
●
Canada ICES-003, issue 4, Class A
●
UL/IEC 60950-1*
●
•CSA C22.2 No. 60950-1-03
●
NOM-01913
*This server model is certified by the respective UL and NOM agencies.
Expansion Options
8 PCIe non-hot plug slots 1
PCI-X non-hot plug 133
MHz/64-bit slots
2
Power
Steady-state output power 625W
Autoranging AC mains input Yes
Power Factor Correction
(PFC)
Yes
Maximum hot-swap power
supplies
2
Hot-swap power supplies
installed
2
Mains input frequency range 47–63 Hz
Operational input voltage
ranges
●
90–137 VAC minimum
●
180–265 VAC maximum