User guide

10
Chapter 4: Connecting the High Gain Omni-Directional Antenna
High Gain 9dBi Omni-Directional Antenna
4. The bottom of the Antenna has a removable black covering. Remove this and attach the lightening protector
as illustrated below by inserting the male end of the protector into the Antenna.
5. Attach the male cable end of the cable to the lightning protector.
6. Attach the male end of the cable that has the white tape around it to the Wireless-G Exterior Access Point.
7. If you are mounting to a pole, insert the pole (not included) into the mounting bracket assembly. As discussed
previously, the pole must give the antenna at least 2 meters of clearance from the ground.
8. If you are mounting to a base (not included), make sure the base is secure.
Congratulations! The connection is complete.
You can begin using the Antenna.
Connect the Lightening Protector to the Antenna
Connect the Cable to the Lightening Protector
Connect the Access Point to the Cable