Datasheet

642 -531
Leading the way in IT testing and certification tools, www.testking.com
- 164 -
QUESTION NO: 10
Which common command are you going to use to clear the contents of the translation
slots when needed?
A. clear xlate
B. clear translate
C. clear all
D. show translate
Answer: A
Explanation:
The xlate command allows you to show or clear the contents of the translation (xlate) slots.
show xlate, clear xlate
Reference: Cisco Secure PIX Firewall (Ciscopress) page 77
QUESTION NO: 11
When working on your PIX, you would like to view the network states of local hosts.
What command could you use?
A. local host all
B. show local-host
C. show host all
D. show local remote
E. show set local
Answer: B
Explanation:
The show local-host command assists you in characterizing your “normal” load on a
statically translated host, both before and after setting limits.
Reference: Cisco Secure PIX Firewall (Ciscopress) page 171
QUESTION NO: 12
If you wanted to enable access to a higher security level interface from a lower level
interface what could you do?
A. Set the conduit to 0/1.
B. Use the static and access-list commands.
C. Set the Eth1/0 interface to auto.
D. Use the nat and global commands.
Answer: B