Datasheet

642 -531
Leading the way in IT testing and certification tools, www.testking.com
- 61 -
D. Manually enter the correct software version in the version field under the Sensor’s
Identification window.
E. Use the Query Sensor option next to the version field under the Sensor’s identification
window to automatically discover the unlisted version.
Answer: C
Explanation:
Page 12-5 CSIDS Course under Device - Sensor
Under the last paragraph, if the Sensor software version is not listed in the drop-down menu, it
will be necessary to update the IDS MC with the latest version of IDS Signatures
QUESTION NO: 3
Which of the following pieces of information is needed to add a Sensor to IDS MC if the
Discover Settings check box is NOT selected?
A. Correct IP address
B. Correct user ID and password
C. Any legitimate values for IP address, Sensor name, user ID, and password
D. Correct Sensor name and SSH settings
E. Correct user ID, password, and IP address
Answer: C
Explanation:
Step 5 Provide the information required by the Enter Sensor Information page:
a. Enter the IP address of the sensor.
b. Enter the NAT address of the sensor, if there is one.
c. Enter the sensor name.
d. To retrieve sensor settings from the sensor, select the Discover Settings check box.
Note If you choose to discover settings, you may have to wait from 30 seconds to several
minutes, depending upon the size and complexity of your network and its traffic.
e. Enter the user ID and password for Secure Shell (SSH) communications between your host
and the sensor:
• When you are using a sensor appliance, the user ID is netrangr, and the
password is one that you assign.
• When you are using an IDS module, the user ID is ciscoids, and the password is
one that you assign.