Installation guide

Release Notes for Cisco IOS Release 12.0(5)XK Feature Packs for Cisco MC3810 3
Memory Requirements
• Upgrading to a New Software Release, page 5
• Product Numbers Quick-Reference List, page 5
• Feature Pack Overview Table, page 6
• Feature Set Tables, page 6
Memory Requirements
Hardware Supported
Cisco IOS Release 12.0(5)XK supports the Cisco MC3810 multiservice access concentrator. The
Cisco MC3810 base chassis is a semi-fixed configuration router that can be customized at the factory
for a specific application. The base chassis includes the following components:
• One fixed Ethernet LAN port
• A console port and an auxiliary port
• Two synchronous serial ports
• Five mounting areas for functional modules that support additional capabilities
• AC, DC, or redundant power supply
Cisco MC3810 series concentrators are supplied in various standard hardware configurations. These
are equipped with different sets of functional modules to provide specific functional capability.
Many configurations are possible, but they are all variations of the basic categories described in
Table 2. Supported hardware is shown in Table 3. The chassis opening for any mounting area not
equipped with a functional module is closed off with a removable cover plate.
Table 1 Cisco MC3810 Default Memory and Upgrade Options
Memory Type Defaults Upgrade Options
Flash 8 MB 16 MB Flash, MEM-381-1X16F=
DRAM 32 MB —
Table 2 Cisco MC3810 Series Standard Hardware Categories
Category Service Types Supported Required Modules Optional Modules
Base chassis Base chassis services
1
None Optional modules can be added to create
other chassis variations
Analog voice
chassis
Base chassis services
1
plus
compressed analog voice
connections to telephone, fax,
central office, analog PBX
AVM with 1 to 6
APMs
VCM3 or VCM6
MFT
2
to support a channelized T1 or E1
trunk
MFT
2
and VDM
3
to support video codec
4
dialing
Digital voice
chassis
Base chassis services
1
plus
compressed digital voice
through digital PBX
DVM
VCM3 and/or VCM6
(1 or 2 VCMs)
MFT
2
to support a channelized T1 or E1
trunk
MFT
2
and VDM to support video codec
dialing
BRI voice
chassis
Base chassis services
1
plus
compressed digital voice
through PINX
BVM and MFT
1
VCM3 and/or VCM6
(1 or 2 VCMs)
MFT
2
and VDM
3
to support video codec
dialing