Technical information

Ordering Guide
© 2010 Cisco and/or its affiliates. All rights reserved. Cisco Confidential/Proprietary—Pricing for illustration purposes only. Pricing subject to change. Page 64 of 88
MCS 7835/45-I2 and MCS 7816/25/28-I3 and-I4 have partial support for IBM’s Remote Supervisor Adapter II (RSA
II).
• MCS 7835/45-I2 ship with this hardware.
• MCS 7816/25/28-I3 and –I4 do NOT ship with this hardware. Customers may order direct from IBM and
install themselves.
• UC apps have no integration with RSA II firmware, software, licensing or user interfaces.
• RSA II feature support by UC is limited to remote console and remote power management. Other features
such as remote media are not supported.
• Above support includes Software-only equivalents based on IBM x3650, x3250, and x3250-M2 as described
at www.cisco.com/go/swonly
MCS 7835/45-H2, MCS 7825/28-H3 and MCS 7825-H4 have partial support for HP’s Remote Integrated Lights Out
(RiLO, iLO or iLO2).
• MCS 7835/45-H2 ship with this hardware.
• All other HP MCS servers do NOT ship with this hardware. Customers may order direct from HP and install
themselves.
• UC apps have no integration with iLO firmware, software, licensing or user interfaces.
•
• iLO feature support by UC is limited to remote console and remote power management. Other features
such as remote media are not supported.
• Above support includes Software-only equivalents based on HP DL380G6, DL380G5, DL320-G5p and
DL320-G5 as described at www.cisco.com/go/swonly.
See also the document “Technical Prep for Migrating to Cisco UCM 6.1” at the Partner Migration site at
http://www.cisco.com/go/ucmigration
Note that the above support applies only to service processor features that Cisco supports. If after installation the
customer installs a service processor license that enables additional features, or tries to use additional features that
are not listed as supported by Cisco, then the customer will not be supported by Cisco even if the features seem to
“work”.
5.4 Server Migrations
If the customer wants to transfer software licenses to a new, better, or otherwise different physical server, consult the
Ordering Guide for your software to see if any prerequisite or additional steps are required.
Specifically for Cisco Unified Communications Manager, server migrations as part of an upgrade from DLU licensing
to User Connect Licensing do not require Hardware Migration SKUs.